Ford alcoa wheels

Ford alcoa wheels DEFAULT

Ford Transit HD Dual Rear Alcoa Wheel Package 16&#;6

Description

Alcoa 16&#; x 6&#; Polished Rim & Hub-Pilot for a Dual Style Ford Transit

Can you tell me exactly how many wheels I&#;m getting in this package?

You get two front aluminum polished wheels and two rear aluminum polished wheels.

Do you know the part numbers of those products, respectively?

The front wheels have the number and the rear wheels have the number

What are in the cover kits though? What can I expect to get in those?

You should be getting the following items in the cover kit. Four Alcoa hub covers, 24 Alcoa 1 1/16&#; hex nuts with collars, and 24 Alcoa chrome lug nut covers.

What&#;s the part number of the hub covers?

The number we have is

What about the Alcoa chrome lug nut covers?

The number that they have is

What are the specs of the wheels?

They are 6-hole, mm bore, hub piloted dual-mounting two piece flange nut, and have a bolt circle.

How much do they weight individually before they are installed and inflated?

They weight 18 lbs each.

What&#;s the max load and inflation level?

They can handle lbs and 69 psi. Please keep in mind this does not increase the amount of weight your rig can carry.

What is the wheel outset of these wheels?

The wheel outset as told to us by the manufacturer is mm.

What about the wheel inset?

The wheel inset we were told by the manufacturer is mm.

What is the installed valve stem?

It is TRC.

I assume these would have some kind of warranty then, right?

Yes. They carry a year warranty. However, you would be dealing with the manufacturer as they are the ones supplying the warranty on these wheels.

Do you know which vehicles these wheels will fit? Do you have a list?

See the list below:

  • Ford Dual Transit Van
  • Ford Dual Transit Van
Weight80 lbs
Dimensions40 × 18 × 18 in
Sours: https://www.sprinterstore.com/product/ford-transithd-dual-rear-alcoa-wheel-packagex6-free-shipping/

ALYU20 Ford Ranger Alcoa Wheel Machined #1L5ZEA

About Our Wheels

Wheels/Rims are manufactured out of steel or aluminum (alloy) and are measured by the diameter of the tire they accept in combination with its width. For example, a 16x6 wheel will accept a 16 inch (R16) tire and will measure 6 inches wide from inside lip to inside lip. We offer wheels based on their original (Stock) applications. The wheels we offer may fit Make/Model/Years other than those shown; however we cannot instruct customers on fitment outside of the vehicles original configuration. If the wheel/rim on this page doesn't appear to be what you need, please Click Here to your navigate to your make/model vehicle and view all the wheels available for your model.

The majority of wheels we offer are (OEM) wheels, reconditioned to factory specifications. Depending on the rim, we may also offer brand new replicas, or new takeoff wheels. Unless requested via e-mail or phone, the customer may receive any one of these. Please Click Here for detailed information regarding our wheels. We offer a % Satisfaction Guarantee on all our wheels. As with all our products, we offer FREE SHIPPING on orders shipped within the contiguous U.S.

Please verify the wheel being purchased looks exactly like the wheel on your vehicle. If you are purchasing 4(four) wheels, please verify the wheels being purchased are appropriate for, and will fit your specific application. Because HH Auto staff cannot inspect the customer's vehicle, it is the responsibility of the customer to ensure the product that is being ordered will fit his/her vehicle. Please Click Here for detailed information regarding our policies.

Finally, there is often more than one wheel option for the same Make/Model/Year; however, the wheel design is seldom the same. Although we provide OEM part numbers and/or indents for reference, we sell wheels by visual identification. Do NOT purchase a wheel based on the part number(s) displayed, visually make sure the wheel pictured looks exactly like the wheel on your vehicle. If you are unsure of what to order, please contact us Toll Free, () or e-mail us using the link at the bottom of the page.

Sours: https://www.hubcaphaven.com/mm5/
  1. Nhk world tv
  2. Church signs sayings
  3. Thomas 3d model
I have 10 of the factory Ford Alcoa wheels that I was planning on running on my truck. 6 on the truck, 2 for a set of paddles I have and 2 spares just laying around for the heck of it

I don't remember off hand what the diameter of the center hole is but it's roughly ". My new rear axle is a full floater and it's going to have a " diameter center cap so I need to have the center of the wheels machined out. At the same time I need to open the holes up to clear the 5/8" studs and I also am going to switch over to a 90° taper instead of the 60° stock taper.

My concern is how thin the area of material between the new " center bore and the edge of the holes for the wheel studs. Seems like it's going to be pretty tight and a little bit of a concern to me.




You can see once I have that center hole machined larger to fit over the new rear caps it's going to start getting thin in that area (yes I'll be getting different lug nuts, those are just what I had laying around for now)

I can't be the first person running these wheels on a 5x pattern with the large center bore. Has anyone had any issues with them? I've considered going to a large flanged nut and having the face machined for a flat mating face for a flange bolt but the wheels technically aren't hub centric front and rear and removing the taper from the equation opens it up to not being truly centered when mounted.

Thoughts? Has anyone had any issues or experience trying to set these wheels up to work? I'd much rather modify and run these if I can over buying new ones since I have 10 already and they're the wheels I'd like to actually run on the truck.

 

Sours: https://www.dezertrangers.com/threads/modifying-factory-ford-alcoa-wheels/
 
ksbrktracer's Avatar
 
Re: will Ford alcoa dually wheels work on a k30?

Check bolt pattern , I did not think ford and chevy were the same. Dodge and chevy are the same with different size center bores. Dodge will fit chevy but chevy will not fit dodge. Chevy is 8 on until and then they changed to 8 on
__________________
TNT-Motorsports
Tulsa Oklahoma
website www.tnt-motorsports.org
facebook https://www.facebook.com/TNTMOTORSPORTS1/

Tommy Lee


AMERICAN Racing , BOSS , RACELINE , REV, RIDLER , ROCKET Racing ,US Mag , FOOSE , MCGAUGHY'S ,BELL-TECH , FESLER ,CPP , RIDETECH , ACCUAIR , BAER BRAKES , ETC
Sours: http://chevytrucks.com/vboard/showthread.php?t=

Wheels ford alcoa

Ford Transit 350HD Dual Rear Alcoa Wheel Package 16×6

Description

Alcoa 16″ x 6″ Polished Rim 261801 & 261802 Hub-Pilot for a 350 Dual Style Ford Transit

Can you tell me exactly how many wheels I’m getting in this package?

You get two front aluminum polished wheels and two rear aluminum polished wheels.

Do you know the part numbers of those products, respectively?

The front wheels have the number 261801 and the rear wheels have the number 261802.

What are in the cover kits though? What can I expect to get in those?

You should be getting the following items in the cover kit. Four Alcoa hub covers, 24 Alcoa 1 1/16″ hex nuts with collars, and 24 Alcoa chrome lug nut covers.

What’s the part number of the hub covers?

The number we have is 024000.

What about the Alcoa chrome lug nut covers?

The number that they have is 001901.

What are the specs of the wheels?

They are 6-hole, 138.8mm bore, hub piloted dual-mounting two piece flange nut, and have a 180 bolt circle.

How much do they weight individually before they are installed and inflated?

They weight 18 lbs each.

What’s the max load and inflation level?

They can handle 2065 lbs and 69 psi. Please keep in mind this does not increase the amount of weight your rig can carry.

What is the wheel outset of these wheels?

The wheel outset as told to us by the manufacturer is 124mm.

What about the wheel inset?

The wheel inset we were told by the manufacturer is 110mm.

What is the installed valve stem?

It is TR553C.

I assume these would have some kind of warranty then, right?

Yes. They carry a 10-year warranty. However, you would be dealing with the manufacturer as they are the ones supplying the warranty on these wheels.

Do you know which vehicles these wheels will fit? Do you have a list?

See the list below:

  • 2016 Ford 350 Dual Transit Van
  • 2017 Ford 350 Dual Transit Van
Weight80 lbs
Dimensions40 × 18 × 18 in
Sours: https://www.sprinterstore.com/product/ford-transit-350hd-dual-rear-alcoa-wheel-package-16x6-free-shipping/
Top 5 Dually Wheels!

Individual Alcoa Wheels

Alcoa Classic Single Wheel 16" x 7" " bolt circle, " hub bore, " backspace inches, " offset, lbs. max load, psi max inflation, weights 19 lbs., stud pilot, uses TR valve stem.  No accessories come with wheel except for valve stem.
Fits:
Chevrolet/GMC HD, , HD,
Dodge Ram , pickup
Ford E, E Single Rear Wheel
Ford F, F Single Rear Wheel
" Trailer Wheel
(read more)
Alcoa Classic Dual Wheel Polished Front " x " MM" bolt circle, " center bore, " bolt hole diameter, " outset, " inset, lbs. max load, psi max inflation, weights 31 lbs., hub pilot, uses TRC valve stem.  No accessories come with wheel except for valve stem.
FITS: 
CHEVY GMC / Kodiak/TopKick
(read more)
DB
Alcoa Classic Dual Wheel Dura Bright Polished Front " x " MM" bolt circle, " center bore, " bolt hole diameter, " outset, " inset, lbs. max load, psi max inflation, weights 31 lbs., hub pilot, uses TRC valve stem.  No accessories come with wheel except for valve stem.
FITS: 
CHEVY GMC / Kodiak/TopKick
(read more)
Alcoa Classic Dual Wheel Polished Rear " x " MM" bolt circle, " center bore, " bolt hole diameter, " outset, " inset, lbs. max load, psi max inflation, weights 31 lbs., hub pilot, uses TRC valve stem.  No accessories come with wheel except for valve stem.
FITS: 
CHEVY GMC / Kodiak/TopKick
(read more)
DB
Alcoa Classic Dual Wheel Dura Bright Polished Rear " x " MM" bolt circle, " center bore, " bolt hole diameter, " outset, " inset, lbs. max load, psi max inflation, weights 31 lbs., hub pilot, uses TRC valve stem.  No accessories come with wheel except for valve stem.
FITS: 
CHEVY GMC / Kodiak/TopKick
(read more)
Sours: https://www.southwestwheel.com/cindividual-alcoa-wheels.aspx

Similar news:

Individual Alcoa Wheels

167041
Alcoa Classic Single Wheel 16" x 7" 8-6.5" bolt circle, 5.155" hub bore, 4.290" backspace inches, 0.250" offset, 3750 lbs. max load, 110 psi max inflation, weights 19 lbs., stud pilot, uses TR-542 valve stem.  No accessories come with wheel except for valve stem.
Fits:
1996-2010 Chevrolet/GMC 1500HD, 2500, 2500HD, 3500
1994-2002 Dodge Ram 2500, 3500 pickup
1986-2014 Ford E250, E350 Single Rear Wheel
1948-1998 Ford F250, F350 Single Rear Wheel
8-6.5" Trailer Wheel
(read more...)
765421
Alcoa Classic Dual Wheel Polished Front 19.5" x 6.75" 8-275MM" bolt circle, 8.709" center bore, .975" bolt hole diameter, 5.55" outset, 4.72" inset, 5000 lbs. max load, 130 psi max inflation, weights 31 lbs., hub pilot, uses TR-553C valve stem.  No accessories come with wheel except for valve stem.
FITS: 
2003-2017 CHEVY GMC 4500/5500 Kodiak/TopKick
(read more...)
765421DB
Alcoa Classic Dual Wheel Dura Bright Polished Front 19.5" x 6.75" 8-275MM" bolt circle, 8.709" center bore, .975" bolt hole diameter, 5.55" outset, 4.72" inset, 5000 lbs. max load, 130 psi max inflation, weights 31 lbs., hub pilot, uses TR-553C valve stem.  No accessories come with wheel except for valve stem.
FITS: 
2003-2017 CHEVY GMC 4500/5500 Kodiak/TopKick
(read more...)
765422
Alcoa Classic Dual Wheel Polished Rear 19.5" x 6.75" 8-275MM" bolt circle, 8.709" center bore, .975" bolt hole diameter, 5.55" outset, 4.72" inset, 5000 lbs. max load, 130 psi max inflation, weights 31 lbs., hub pilot, uses TR-553C valve stem.  No accessories come with wheel except for valve stem.
FITS: 
2003-2017 CHEVY GMC 4500/5500 Kodiak/TopKick
(read more...)
765422DB
Alcoa Classic Dual Wheel Dura Bright Polished Rear 19.5" x 6.75" 8-275MM" bolt circle, 8.709" center bore, .975" bolt hole diameter, 5.55" outset, 4.72" inset, 5000 lbs. max load, 130 psi max inflation, weights 31 lbs., hub pilot, uses TR-553C valve stem.  No accessories come with wheel except for valve stem.
FITS: 
2003-2017 CHEVY GMC 4500/5500 Kodiak/TopKick
(read more...)
Sours: https://www.southwestwheel.com/c-1042-individual-alcoa-wheels.aspx


1423 1424 1425 1426 1427