Ender 5 extruder

Ender 5 extruder DEFAULT

Ender 5 Direct Drive Upgrade Kit v

Description

This is a new and improved version of our previous Ender 5 Direct Drive Kit

Ender 5 Direct Drive

Creality Ender 5 Direct Drive upgrade kit:

Increase print quality, simplify retractions and filament changes, and print any material with ease with the MDD v, the easiest direct drive conversion kit available for your Creality Ender-5 or  3D printer.

Lighter than a Titan Aero or Bondtech, the MDD takes just minutes to install&#; with no firmware changes, no printable volume loss, and no cutting or splicing required.

The MDD (or ”Modular Direct Drive”) easily converts your stock Ender 5 into a true direct drive 3D printer. While the MDD is compatible with many different hot end and extruder combinations, it was specifically engineered to convert your stock components into a powerful direct drive system with no additional hardware or wiring needed, making it the simplest and most flexible direct drive system.

Ender 5 Pro/Plus Version

This kit will work with an Ender 5 Pro or Plus but you need to purchase an additional motor extension cable for the Ender 5 Plus. Some Ender 5 Pro machines ship with an aluminum extruder assembly and need a different spacer in order to fit. Find the files to print this spacer here as the &#;New Creality (non-geared)&#; variant.

CR Version

There is also a version of this that will work on the Creality CR and Tevo Tornado available here.

Ender 3 Version

If you have an Ender 3, you can purchase a kit designed specifically for the Creality Ender 3 here.

HIGHLIGHTS

  • Increase print quality and fix retraction issues
  • Does not require dual lead screws
  • Print higher temperature and flexible materials
  • Reduce retractions and ooze control
  • Easier filament changes
  • No firmware or bootloader flashing
  • No cutting or splicing wires
  • Works with stock extruder and hot end
  • Compatible with many printable mods

DIRECT DRIVE VS. BOWDEN TUBE EXTRUDERS

Bowden style extrusion systems like those found on Creality printers rely on long PTFE tubes to feed filament to the hot end, and as such are more prone to extrusion issues. While Bowden setups generally allow for lighter print head weights, mounting the extruder separately from the hot end comes at the expense of less precise retraction control and filament changes.

By contrast, direct drive extruders eliminate most common extrusion problems by mounting the extruder and hot end very closely together, removing the need for the PTFE tubing in between and drastically shortening and simplifying the filament path. While this approach can significantly improve extrusion and retraction, and allow for easier printing of difficult materials like flexible filaments, it also increases the weight on the hot end carriage, necessitating reduced print speeds if made too heavy.

MDD &#; A BETTER DIRECT DRIVE OPTION

Weighing in at g when installed with a full-sized stepper, the MDD is light enough to print fast, while solving many of the extrusion problems inherent to Bowden extruder systems. And because it entirely replaces the hot end carriage, it provides a vastly more rigid mounting platform for the extruder and hot end compared with printed direct drive mounts, which are more prone to vibration and ringing when printing at higher speeds.

Want to install this on a larger format machine like the CR and larger?

All you need is one or more motor extension cables.

Hot end / Extruder Compatibility

Creality Mk8E3D v6 / Lite6Micro SwissJ-Head
Creality Mk10 (factory or aluminum)Spacer includedSTL(s) needed: V6 / J adapterSpacer includedSTL(s) needed: V6 / J adapter
Bondtech BMGSTL(s) needed: BMG spacer, Mk8 J adapter, Mk8 fan ductSTL(s) needed: BMG spacerSTL(s) needed: BMG spacer, Mk8 J adapter, Mk8 fan ductSTL(s) needed: BMG spacer
E3D TitanSTL(s) needed: Titan 6mm spacer, Mk8 J adapter, Mk8 fan ductSTL(s) needed: Titan 6mm spacerSTL(s) needed: Titan 6mm spacer, Mk8 J adapter, Mk8 fan ductSTL(s) needed: Titan 6mm spacer
SeeMeCNC EZR Struder™STL(s) needed: EZR Struder spacerSTL(s) needed: EZR Struder spacer, V6 / J adapterSTL(s) needed: EZR Struder spacerSTL(s) needed: EZR Struder spacer, V6 / J adapter

Technical Specs

  • CNC machined aluminum construction
  • Injection molded fittings &#; no 3D printed parts*
    • Printed or customized parts may be required to mount up certain combinations of non-factory or 3D printed components.
  • Weighs under g fully installed (including fan shroud, wiring, hardware)
  • Wire harness extender included
  • High-temp PTFE tube rated for ºC+
  • Simple 20 minute installation (instructions provided)

FAQ

Q: Is it too heavy? Do I need a dual Z lead screw?

A: No, a dual lead screw setup is not needed for the MDD, even when using a full-sized Creality stepper motor. Just a properly aligned X gantry (see this guide for more information: https://www.youtube.com/watch?v=4bFYH0X3qjk)

Our tests have demonstrated that the increased effector mass on the X axis is not heavy enough to cause significant unwanted deflection or drop, even higher than average travel speeds. This is partly due to the rigid coupling and alignment of the stepper motor with the MDD&#;s solid carriage plate, which restricts unwanted movements and vibrations, and effectively translates those forces to the rollers, which are more than strong enough to bear the load without deforming.

Q: Which Creality Ender and CR models is it compatible with?

A: The MDD will fit all Ender 3 models, including the regular Ender-5, Ender-5 Plus, and Ender-5 Pro.

For the Ender 3 version, click here.

For the CR version, click here.

Q: What hot ends and extruders does the MDD work with?

A: Many, though we recommend using it with the stock Creality hot end and extruder combination. Other supported components include extruders like the Bondtech BMG, E3D Titan and EZR Struder, as well as hot ends like the E3D V6 and Micro-Swiss, with more compatibility coming soon.

Q: What slicer settings do I need to change?

A: Slicer settings can vary based on machine, filament, etc. However, you should expect to significantly reduce your slicer retraction settings (we recommend starting around mm at 30mm/s and tuning from there). You will also need to disable ooze control methods like coasting, wipe, etc.

Q: Where does this product ship from?

A: We manufacture and produce our kits in the USA. All MDD kits purchased from Fargo 3D Printing ship from Fargo, ND in the USA.

More Resources

Sours: https://www.fargo3dprinting.com/products/enderdirect-drive-upgrade-kit/

Micro Swiss Direct Drive Extruder for Creality Ender 5

Micro Swiss Direct Drive Extruder for Creality Ender 5 
This 3D Printer upgrade is especially recommended for all those who want to print Flexible Filaments.
What exactly is a direct drive extruder or a direct drive motor extruder? The direct drive extruder is adapted so that the motor which pushes the 3D Filament towards the print nozzle or nozzle is moved from the 3D Printer housing to the main main guide of the 3D printer, where the print head is. This kit is easy to mount on your 3D Printer. Watch the video below to see how easily it is to mount a Micro Swiss direct drive extruder.  

  • No modification required, simple plug and play
  • No printed brackets or sandwiches

Features:

  • Dual-drive train
  • Hardened tool steel, CNC precision cut gears
  • Adjustable filament grip
  • Easy filament loading
  • Short, highly constrained filament path
  • Prints flexible filaments with high speed and accuracy
  • Outstanding extrusion control
  • Lightweight aluminum body


CNC Machined and Assembled in USA

Suitable for the following 3D printers:

  • Ender 5
  • Ender 5 Pro
  • Ender 5 Plus

Installation: 

 

Sours: https://www.azurefilm.com/
  1. Psychology student jokes
  2. Memphis car audio
  3. Craigslist in houston
  4. Boot manager lenovo
  5. Blizzard item restoration

Thread: Ender 5 extruder motor skipping

Hi!
My ender 5 pro extruder motor started skipping steps, causing under extrusion, and a clicking sound. When I turn on retraction in the slicer, the filament gets squished when it goes through the extruder a few times (ie. feeding-retracting-feeding again on the same part of filament), and then the squished filament gets stuck in the capricorn tube. With retraction disabled, everything works fine (apart from stringing etc. caused by no retraction). I tried lowering the extruder spring tension, but that didnt solve the problem. As I lowered the spring tension, the extruder gear started slipping on the filament (I checked and there are no clogs, simply the extruder gear has not enough friction on the filament), and I could not find a sweet spot where the extruder spring has enough force to push the filament, but not that much to squish it. I tried various filaments (PLA and PETG) form different brands, and the same problem happend with all.
Does anyone have an idea to solve this? I think upgrading to a dual gear extruder would solve the problem, but I dont want to spend that much if not necessary.

Sours: https://3dprintboard.com/

#Extruder #Kit #for #Creality #Ender #5 #3D #Printer #Drive #Board #Direct #Drive #Gear #Plate Extruder Kit for Creality Ender 5 3D Printer Drive Board Direct Drive Gear Plate % brand new and high quality Features: Made of high-quality materials, durable. Durability: stability, repairability, applicability and flexibility. Direct drive extruder improves extrusion and retraction by eliminating the need for PTFE tubing. The direct drive board kit for 3D printers continues to be assembled quickly. Install within minutes, no need to change firmware, no need to cut or splice wires. Ender 5 Direct Drive Board Kit only, other accessories demo in the picture is not included! Specifications: Material: Metal Cable Length: appcm/in Color: Black Quantity: 1 Set Note: No retail package. Please allow cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 Set x Ender 5 Direct Drive Board Kit

Sours: https://shopee.co.id/zzz-Extruder-Kit-for-Creality-EnderD-Printer-Drive-Board-Direct-Drive-Gear-Plate-i

5 extruder ender

Micro-Swiss Direct Drive Extruder for Creality Ender 5

Extruder upgrade for your Creality Ender 5 series 3D printer

  • Dual drive gear
  • Easy filament loading
  • Perfect for flexible filaments
  • Light aluminium body
  • Direct Drive Extruder for Creality Ender 5 - With hotend

Price shown includes 20% VAT.Excludes delivery costs

In stock

Delivery on Tuesday, 19 October: Order before Monday at

  • Dual drive gear
  • Easy filament loading
  • Perfect for flexible filaments
  • Light aluminium body
With hotend:€ ,99
Without hotend:€ 79,99

Product information & technical details

Item no.:MS-M
Manufacturer No.:M
Manufacturers:Micro-Swiss
Content:1 pc
Item no.:MS-M
Manufacturer No.:M
Manufacturers:Micro-Swiss
Content:1 pc

Description

The Micro Swiss Direct Drive Extruder is an entry-level system for Creality Ender 5 series 3D printers.

  • No modification required, just plug and play
  • No printed brackets

Properties:

  • With two drive gear
  • Hardened tool steel, CNC precision gearing
  • Adjustable filament tension
  • Easy filament loading
  • Short, severely restricted filament path
  • Prints flexible filaments with high speed and accuracy
  • Excellent extrusion control
  • Light aluminium body

No stepper motor is included in the contents of delivery. The original stepper motor from the 3D printer is still used.

Questions & Answers about Direct Drive Extruder for Creality Ender 5

Pose a question about this product to customers who have already purchased the item. Please forward any other order-related questions to our Customer Service Team.

  • Are there fixing points for a BL touch?

    1 Answer, last answered on 13 August

    • Andrew

      13 August

      Customer Service

  • Will this work with an Ender 6?

    1 Answer, last answered on 06 July

    • Andrew

      06 July

      Customer Service

  • What nozzle do I need to order for a replacement for this micro Swiss hot end , have one fitted to a ender 5 plus I was given and would like a wasn't sure on one as so many on

    1 Answer, last answered on 07 June

    • Andrew

      07 June

      Customer Service

  • Is the hotend the micro swiss all-metal hotend from this page? https://www.3djake.uk/micro-swiss/all-metal-hotend-kit-for-cr

    1 Answer, last answered on 12 January

    • Andrew

      12 January

      Customer Service

  • What size nozzle comes with this kit?

    1 Answer, last answered on 10 September

    • Andrew

      10 September

      Customer Service

Show all answers

Customer Reviews

  • Oggy

    04 April

    Verified Buyer

  • Jason - Kent

    23 March

    Verified Buyer

  • TtheB from St Marys Bay, Kent

    20 September

    Verified Buyer

Did you know?

Since March , a 3D printer has been stationed on the ISS space station.

Sours: https://www.3djake.com/micro-swiss/direct-drive-extruder-for-creality-ender-5
Micro Swiss Dual Gear Direct Drive Upgrade For Ender 5 and Ender 5 Plus 3D Printers

She almost screamed tr-ah-ah, yes-ah-ah. Another orgasm covered Nina with her head. I, too, could no longer restrain myself and, without stopping my movements, abundantly lowered into the bowels of the heated cave, distributing sperm along its entire length. Having finished at the same time, we were quiet. Without removing the penis from the pussy, I gently covered Ninochka with my body, pressing my chest against her back and burying my nose in the neck wet.

You will also be interested:

A push, another push. he throws his sperm out to her deep into the anus. Taking out a member, Denis gives a member of Lisa in her mouth.



1841 1842 1843 1844 1845