Bios update hp

Bios update hp DEFAULT

How to Update BIOS Windows 10 HP? See a Detailed Guide! [MiniTool Tips]

Languages: Deutsch

Summary :

HP BIOS update

Is it good to update BIOS? How to update BIOS on HP laptops or desktops? You can find answers to these questions after reading this guide on the MiniTool website. You had better choose a proper method for HP BIOS update based on your actual situation.

What Is HP BIOS Update?

BIOS (basic input/output system) is firmware in a computer and it is used to perform hardware initialization when the PC is powered on. Every time you boot your computer, it is the first software to run and is responsible for loading the operating system and some settings.

Tip: To access BIOS, you can follow these methods mentioned in this post - How to Enter BIOS Windows 10/8/7 (HP/Asus/Dell/Lenovo, any PC).

Sometimes a BIOS update is required. Usually, it is used for standard maintenance of the computer. BIOS update means there is a new version of BIOS and some changes have been made to the way the machine is handled.

Well then, is it necessary to perform an HP BIOS update if you are using an HP laptop or desktop? Proceed to the next part to find the answer to this question.

Should You Do a BIOS Update HP?

As for a BIOS update, the change may not be as obvious as a system update. You won’t update the BIOS of your computer as frequently as a system update if you don’t need it.

A BIOS update will not make your computer faster. If you can run your HP computer properly, it isn’t necessary to perform an HP BIOS update because the update may cause some serious problems like PC not booting. But if your HP laptop or desktop doesn’t function well, you may need to get the latest version.

Usually, take BIOS update into account when you have encountered these situations:

  • If there are systematic bugs related to BIOS, update HP BIOS to repair them.
  • After upgrading the processor of your HP computer, perform an HP BIOS update. This can be helpful to let your motherboard and CPU collaborate properly.
  • Sometimes updating BIOS can help to fix some hardware malfunctions, for example, RAM or CPU issues. But you should only do this if your IT Company recommends or HP supports.

All in all, don’t perform a BIOS update at random unless there are specific situations.

Remember: Back up Your Computer before HP BIOS Update

As has been said above, it is a risky task to update BIOS since system crashes may happen. Thus, you had better create a system backup or back up your crucial files before starting the update. If you are not lucky enough and Windows cannot boot after a BIOS update, you can perform fast disaster recovery to restore the HP PC to a normal state.

How can you back up your HP laptop or desktop before updating BIOS in Windows 10? MiniTool ShadowMaker is highly recommended.

As an all-in-one Windows backup software, it can be used to create a backup for Windows operating systems, files, folders, disks, or partitions. Importantly, you can use it to create a bootable USB hard drive/disk, CD, or DVD to start the unbootable PC for recovery. Of course, besides these features, it also supports file sync, disk cloning, PXE boot, etc.

To enjoy the full features, you can click the following button to download MiniTool ShadowMaker Trial Edition. Note that this edition only allows using 30 days for free.

Free Download

Then, follow the guide below to begin the computer backup:

Step 1: Install and launch MiniTool ShadowMaker Trial Edition on your HP computer.

Step 2: Go to the Backup interface from the toolbar. By default, this backup software helps back up your operating system. You only need to choose a place to store the created system image by clicking Destination.

Tip: To back up your important files, click Source, choose Folders and Files, select the items you need and click OK.

Step 3: Next, click the Back up Now button to start the system or file backup immediately.

MiniTool ShadowMaker system backup

After finishing a backup, go to Tools and click Media Builder to create bootable media for recovery when disasters happen. To know more, refer to this help document - Create Bootable CD/DVD/USB Drive with Bootable Media Builder.

Now you have offered a safeguard for your computer and you can start to update HP BIOS. How to update BIOS on HP laptops or desktops? Proceed to the following part to get much detailed information.

How to Update BIOS Windows 10 HP?

Tip: Before an HP BIOS update, you can check your BIOS version and then go to the website of HP to see if there are any updates to be made.

how to check pc specs windows 10 thumbnail

How to Check PC Full Specs Windows 10 in 5 Ways

How to check PC specs Windows 10? This post provides 5 ways with step-by-step guides to help you find full computer specs in Windows 10 PC/laptop.

Read More

In this part, we list three common ways to update HP BIOS. And now, let’s go to see them one by one.

#1. Use HP Support Assistant for BIOS Update Automatically

In an HP Windows computer, there is a tool called HP Support Assistant (HPSA) that can be used to update your machine automatically, including BIOS. If it is not installed on your PC, go to download the up-to-date version of HP Support Assistant from the official website.

1. In Windows 10, go to the search box to search for HP Support Assistant and open it.

HP Support Assistant

2. Go to the My devices tab to click Check for updates and messages. Then this tool will start checking your computer.

3. If there is an available BIOS update, tick the checkbox next to it. In addition, you can also check the box next to any update you want to install. Next, click Download and install.

4. Wait patiently. After the installation finishes, exit this app.

Tip: According to some HP users, HP Support Assistant is not the best tool for updating the BIOS since one or more updates may not apply to your situation. Or some problems may occur after the automatic BIOS update. So, you had better set this app to notify (no automatic updates) to see the list of updates that HPSA deems relevant to your computer.

#2. Manual BIOS Update HP in Windows 10

If your HP laptop or desktop can open normally, you can go to manually update BIOS in Windows 10. Before a further operation, some preparatory work needs to be done by you to avoid possible problems:

  1. Close all the applications that are open.
  2. Temporarily disable your antivirus program.

For Windows Defender, go to Settings > Update & Security > Windows Security > Virus & threat protection > Virus & threat protection settings and then turn off Real-time protection.

disable real-time protection

For the third-party antivirus software, search for detailed operations from the Internet. If you are using Avast, refer to this post - Best Ways to Disable Avast for PC and Mac Temporarily/Completely.

3. Also, temporarily disable BitLocker Drive Encryption. To do this, go to Control Panel > System and Security > BitLocker Drive Encryption. Then, click Suspend protection in the pop-up window. Also, note down your recovery key.

suspend BitLocker Drive Encryption

Note: If you don’t disable BitLocker, the BitLocker key may not be recognized next time you reboot your computer after an HP BIOS update. Besides, you may lose data or need to reinstall Windows 10 if you forget the recovery key.

Now, it is time to update BIOS on your HP laptop or desktop by following these instructions.

1. Navigate to the HP driver and software download website.

2. Click the corresponding section based on your HP product to start.

3. On the new page, you can click Let HP detect your product or enter your serial number in the text box to continue.

Tip: To find out the serial number, you can check the product label (on the top, side, or back of the computer) or press Ctrl + Alt + S to open the System Information window.

4. Select your operating system and expand BIOS to see available BIOS updates. Then, check one and click Download.

Tip: If you cannot see the list of BIOS, it means there is no available update at present and you don’t need to update it. If you see multiple available BIOS updates, choose a proper one based on the motherboard information. If you see only one update, check if the BIOS version is newer than you currently have.

BIOS HP

5. Double-click the downloaded exe file to start the installation.

6. Accept the terms in the license agreement.

7. Decide the location to save files and the HP BIOS Update and Recovery tool will open. Click Next.

HP System BIOS Update Utility

8. Choose Update and click Next.

9. Then, click Restart Now after the BIOS update is prepared successfully.

10. Click Apply Update Now. Then, the installation will take a few minutes to complete.

11. After finishing the update, click Continue Startup.

Next, log in to your HP computer, resume BitLocker protection and re-enable your antivirus programs.

Update HP BIOS via a USB Flash Drive

If your HP laptop or desktop fails to start, how can you perform an HP BIOS update? You need to create an HP BIOS recovery USB flash drive on a working PC and then install a BIOS update on the original PC.

Tip: Firstly you need to know some information about the problematic HP computer. Just press the Esc key when starting your machine to enter the startup menu. Then, press F1 to open System Information. Note down the product name, SKU number, system board ID, BIOS version, and processor type.

1. Connect your USB drive to a second PC.

2. Go to download a proper BIOS update file by following steps 1-5 mentioned in the second way.

3. After running this HP System BIOS Update Utility, choose Create Recovery USB flash drive.

4. Choose a USB drive. If the drive uses the NTFS file system, click Format.

select a USB drive for HP BIOS update

5. This tool is copying files and you need to wait patiently. Then, click Finish and remove the USB drive.

6. Insert the drive to your original HP computer and enter the startup menu.

7. Press F2 to open the System Diagnostics menu.

8. Select Firmware Management or BIOS Management.

9. Click BIOS Update > Select BIOS Image To Apply > HP_TOOLS - USB Drive > Hewlett-Packard > BIOS > Current.

10. Choose a BIOS update file that should match the system board ID.

11. Click Apply Update Now.

12. After finishing the installation, restart the system.

“How to update BIOS on HP laptops or desktops? Three methods are introduced and you can choose to share them on Twitter to let more persons know.”Click to tweet

Tip: In addition to BIOS update HP, you can perform an ASUS BIOS update, Dell BIOS update, etc. Here is a related article for you - How to Update BIOS Windows 10 | How to Check BIOS Version.

Bottom Line

An HP BIOS update is a risky task and it is necessary to create a backup for your HP computer. Then, follow these three methods mentioned above to easily update BIOS to fix some specific issues or improve PC performance.

If you have any questions when performing the BIOS update in Windows 10, or have any suggestions, leave your idea below or contact [email protected].

HP BIOS Update FAQ

Is HP BIOS update normal?

An HP BIOS update is normal and it is recommended as the standard maintenance of the computer.

Is it good to update BIOS?

Generally, you shouldn’t update your BIOS. A BIOS update is dangerous. But if something (BIOS-related) goes wrong or the current BIOS does not support a Windows upgrade or a hardware component, you can update it.

What happens after HP BIOS update?

After an HP BIOS update, a specific issue may be fixed or your HP motherboard and CPU can collaborate properly.

ABOUT THE AUTHOR

Vera

VeraFollow us

Position: Columnist

Vera is an editor of the MiniTool Team since 2016 who has more than 5 years’ writing experiences in the field of technical articles. Her articles mainly focus on disk & partition management, PC data recovery, video conversion, as well as PC backup & restore, helping users to solve some errors and issues when using their computers. In her spare times, she likes shopping, playing games and reading some articles.

Sours: https://www.minitool.com/backup-tips/hp-bios-update.html

Is this a virus? It is probably a BIOS update pushed through Windows Update. By default BIOS updates can be pushed through Windows Update.

Is HP BIOS update safe?

No need to risk a BIOS update unless it addresses some problem you are having. Looking at your Support page the latest BIOS is F. 22. The description of the BIOS says it fixes a problem with arrow key not working properly.

Can a BIOS update be a virus?

BIOS viruses are extremely difficult to get rid of, but fortunately, they are very rare. Since the BIOS is completely separate from the hard disks of a computer, normal virus scan software will never catch a BIOS virus.

What is HP BIOS update?

HP Consumer Desktop PCs – Updating the BIOS (Basic Input Output System)

  1. An available BIOS update resolves a specific issue or improves computer performance.
  2. The current BIOS does not support a hardware component or a Windows upgrade.
  3. HP support recommends installing a specific BIOS update.

Is it dangerous to update BIOS?

From time to time, your PC’s manufacturer may offer updates to the BIOS with certain improvements. … Installing (or “flashing”) a new BIOS is more dangerous than updating a simple Windows program, and if something goes wrong during the process, you could end up bricking your computer.

What happens if you don’t update BIOS?

Why You Probably Shouldn’t Update Your BIOS

If your computer is working properly, you probably shouldn’t update your BIOS. You likely won’t see the difference between the new BIOS version and the old one. … If your computer loses power while flashing the BIOS, your computer could become “bricked” and unable to boot.

Will BIOS update delete files?

Updating BIOS has no relation with Hard Drive data. And updating BIOS will not wipe out files. If your Hard Drive fails — then you could/would lose your files. BIOS stands for Basic Input Ouput System and this just tells your computer what kind of hardware is connected to your computer.

Can bios be hacked?

A vulnerability has been detected in the BIOS chips found in millions of computers which could leave users open to hacking. … BIOS chips are used to boot a computer and load the operating system, but the malware would remain even if the operating system was removed and re-installed.

Can Uefi get a virus?

The Unified Extensible Firmware Interface (UEFI) is the software that lives on your computer’s motherboard. … So, if you want to own a system and reduce the likelihood of getting caught, UEFI malware is the way to go. The problem is that it’s very difficult to get malicious code into UEFI systems.

Can virus destroy BIOS?

Yes, it is definitely possible.

How long does an HP BIOS update take?

It should take around a minute, maybe 2 minutes.

What does updating your BIOS do?

Hardware updates—Newer BIOS updates will enable the motherboard to correctly identify new hardware such as processors, RAM, and so on. … Increased stability—As bugs and other issues are found with motherboards, the manufacturer will release BIOS updates to address and fix those bugs.

How do I enter bios on HP?

Opening the BIOS Setup Utility

  1. Turn off the computer and wait five seconds.
  2. Turn on the computer, and then immediately press the Esc key repeatedly until the Startup Menu opens.
  3. Press F10 to open the BIOS Setup Utility.

How do you tell if your BIOS needs updating?

Some will check if an update is available, others will just show you the current firmware version of your present BIOS. In that case, you can go to the downloads and support page for your motherboard model and see if a firmware update file that’s newer than your currently installed one is available.

Is flashing GPU BIOS safe?

There are no circumstances where you SHOULD flash gpu bios and manufacturers don’t normally recommend flashing. It’s very rare that there’s a critical bios update for gpus. You should contact customer service first before proceeding. It could void warranties.

Does B550 need BIOS update?

To enable support for these new processors on your AMD X570, B550, or A520 motherboard, an updated BIOS may be required. Without such a BIOS, the system may fail to boot with an AMD Ryzen 5000 Series Processor installed.

Sours: https://ostoday.org/other/is-hp-bios-update-a-virus.html
  1. Bed couch walmart
  2. Asheville nc weather
  3. Aztec leather purse
  4. Swift format string

HP BIOS Update - Remotely Deploy a BIOS Upgrade

Get The Files You Need

When updating the BIOS, you need to download the update for the specific hardware from HP’s support site, or alternatively, you can use HP's SoftPaq Download Manager to acquire both driver updates and BIOS updates. In a previous life, I installed the SoftPaq Manager directly on the PDQ server to easily create PDQ Deploy packages for drivers and bios updates.

It’s worth noting that the silent parameters for deploying a specific bios update vary slightly per package and are listed in the SilentInstall column of the Downloaded SoftPaqs section.

Creating The Package

You’ve downloaded the BIOS file and extracted it to a folder of your choosing:

image3 (1)

Navigate to the BIOS folder you extracted. In addition to the SoftPaq Manager silent parameters, the folder contains HpFirmwareUpdRec.txt that contains additional command line parameters:

-fBIN-fileSpecifies the path to the .BIN image file and does not change the “working directory” from the location of the utility. Default is *.BIN in the executable folder. Valid with all other options.
-ppassword-fileSpecify encrypted password file created with the HpqPswd utility. Valid with all other options.
-sSilent mode. Suppresses all output.
-bIf BitLocker with TPM is in use, automatically suspend it.
-?Show the same usage dialog that appears if an invalid command line is detected. This option overrides all other options, including -s.

In this example, I’ve used the silent and Bitlocker switches. Many of you have Bitlocker encryption on laptops. This update has the switch built in to temporarily bypass Bitlocker encryption on the next reboot, but if your update doesn’t have this, I strongly recommend putting in a to suspend Bitlocker for one reboot. This will prevent it from interfering with the update process. This article can give you some options to accomplish this.

Here’s the BIOS package for PDQ Deploy:

image2 (1)

I like to choose Include Entire Directory, so those files are all local on the client for the upgrade.

Switch to PDQ Inventory and create a dynamic collection for the specific hardware we want to upgrade:

unnamed (10)

Finally, to finish our PDQ Deploy package, it’s a good idea to add a filter, so the BIOS upgrade only runs on a specific computer model. We filter based on our PDQ Inventory dynamic collection: 

image4 (1)

You should be set to deploy to the dynamic collection we created and PLEASE test on 1-2 machines first before rolling this out to the entire dynamic collection. Join us for our weekly webcast to learn more about what PDQ can do for you.

Disclaimer:

This is for informational purposes only and relies that the vendor has not made any changes since the time of this writing that will affect this deployment. Any problems or concerns with their products can be addressed by their support staff.

If you happen to be working with Dell machines, check out Jordan's Dell BIOS Update blog post here.

Sours: https://www.pdq.com/blog/hp-bios-update/

I was wondering in anyone of you guys have ever heard of a laptop (HP) doing a bios update on its own?  At first the user complained that her laptop had hung on a windows update and hadn’t moved for an hour.  I told her to call me if it was still at 6% after lunch.

Overnight it is still at 6% but upon looking at it, the update is for the HP bios.  I have never seen a bios update as part of a scheduled maintenance by a hardware manufacturer.  Is this typically not something that you instigate yourself?


16 Replies

· · ·

XaviR

Serrano

OP

Uff, very dangerous. I think it is impossible.

0

· · ·

Philip5403

Datil

OP

I don't think its typical but there are Bios firmware and ROM updates.

0

· · ·

Brian1535

Poblano

OP

There are settings on HP laptops under the HP Support Assistant for HP updates. If the setting is checked off to automatically install updates( which is the default recommened ), then it maybe trying to auto install updates including bios updates.

If you open up the support assistant and click on settings ( Usually at the bottom right) you should see a section for updates and scans. From there you can uncheck the auto option and set it to not check for updates. That way your users won't be bothered with update notifications from HP.

I try to uninstall as much of the hp software as i can and update the bios and other software if needed from the support site.

Hope that helps.

0

· · ·

Priscilla@HP

Ghost Chili

OP

Hello,

Members, thank you for your assistance. 

Sayne, sorry to hear of your user's challenge with what appears to be an automatic attempt to update the bios.  I hadn't heard of the bios being automatically updated so I checked the HP Forum and found the following that includes some steps to follow.

http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Automatic-BIOS-Update-finished/td-p/506587/page/2

Have you been able to follow the steps provided by Brian if you don't want updates installed automatically?

Please keep us updated.

Regards,

0

· · ·

Alex3031

Mace

OP

I believe the HP update utility can do auto updating of the BIOS.

1

· · ·

RoyL

Thai Pepper

OP

I spoke with HP support about this issue a few weeks ago.  When using the HP Support Assistant, it will update any driver, firmware, or BIOS when its urgency is listed as recommended.  HP does not push down "normal" updates through HP Support Assistant.  

HP Support assistant is available for only Windows 7.

0

· · ·

carolparker2

Pimiento

OP

I just allowed HP to update HP Bios on my computer, today. It seems it updated smoothly. No problems with it, so far. I admit I am nervous about it.

0

· · ·

aldingregory

Pimiento

OP

I have a HP ENVY laptop I had a bios update as per hp. I alowed the updated and now laptop will not start at all. Any recommendations. ☹️

0

· · ·

Priscilla@HP

Ghost Chili

OP

@aldingregory, thank you for your post and I regret that the update has proven to be problematic.  I would recommend that  if you are in the U.S. contact HP Support at 800 474-6836.  If you provide with your location if you are not in the U.S. I can provide you with the support number for your location.  Since this is your first post, welcome to Spiceworks!

1

· · ·

aldingregory

Pimiento

OP

Hi all
This HP envy bios has resolved itself. I left it for several hours with battery and mains disconnected. After a few hours reconnected battery switched it on it booted up all ok.
Thanks for advice.

2

· · ·

SW-Desperado

Habanero

OP

sorry i never closed this thread... the laptop was out of warranty and we tossed it... bought a new one... not an HP... the user refused to try that again... sorry HP.  *smile*

0

· · ·

jasonasher

Pimiento

OP

I've got a friend experiencing this same thing. Windows hung and would do nothing. After a hard reset, BIOS began updating, then went to a "Pending Image Being Cleared" progress screen, then the laptop shut down and rebooted. Thankfully hers came back up, but this happened right in the middle of her work day, as she uses her personal laptop to remote into her work desktop to work from home. What a disruption! HP, you're playing a dangerous game by forcing these automatic BIOS updates... HP seems to be getting more and more intrusive all the time, causing me to lose more and more faith in them as a company. Too bad this particular friend didn't heed my warnings, when I told her not to buy Dell or HP and try to use it for work.

1

· · ·

SW-Desperado

Habanero

OP

jasonasher wrote:

I've got a friend experiencing this same thing. Windows hung and would do nothing. After a hard reset, BIOS began updating, then went to a "Pending Image Being Cleared" progress screen, then the laptop shut down and rebooted. Thankfully hers came back up, but this happened right in the middle of her work day, as she uses her personal laptop to remote into her work desktop to work from home. What a disruption! HP, you're playing a dangerous game by forcing these automatic BIOS updates... HP seems to be getting more and more intrusive all the time, causing me to lose more and more faith in them as a company. Too bad this particular friend didn't heed my warnings, when I told her not to buy Dell or HP and try to use it for work.

nobody has overly impressed me lately but I suppose if money was no object I would try to find a Lenovo for myself... but money is and hence i use an old Toshiba 

0

· · ·

patriciamcnally

Pimiento

OP

Hello, I'm not real tech savvy, however just updated the HP BIOS on my laptop and after reading a few comments am nervous! I googled the question and read on HP that it was a safe update? I also just received an update notification from adobe flash player and wonder if it's safe to update? Any ideas? I'm back in school and really don't know much about it. Thanks Patty

0

· · ·

SW-Desperado

Habanero

OP

patriciamcnally wrote:

Hello, I'm not real tech savvy, however just updated the HP BIOS on my laptop and after reading a few comments am nervous! I googled the question and read on HP that it was a safe update? I also just received an update notification from adobe flash player and wonder if it's safe to update? Any ideas? I'm back in school and really don't know much about it. Thanks Patty
Patty... you are probably safe... the flash update shouldnt cause issues and HP has said that these issues were fixed with the update to the bios.

PS welcome to spiceworks

0

· · ·

timothymunene

Pimiento

OP

I recently experienced the same issue when I was updating my HP PAVILION NOTEBOOK from windows 10 Anniversary to this Windows 10 Creators update. Immediately the update was successful my notebook crashed(BSoD) and restarted. After the restart, the HP BIOS UPDATE screen just popped up and immediately started counting progress. It updated and verified successfully and afterwards everything seemed to be working okay until I switched off my machine. Now I cant power it on, when I press the power button it just glows and the screen doesn't respond at all. It cant even boot up. Just the fan runs.I have tried all the trouble-shootings provided in the HP forum but none seems to be working. Any help/solution to this problem will be greatly appreciated by me.

0

This topic has been locked by an administrator and is no longer open for commenting.

To continue this discussion, please ask a new question.

Sours: https://community.spiceworks.com/topic/235678-hp-laptop-and-automatic-bios-update

Update hp bios

The Blog

At a client site, they received newest HP models to be tested. Downloading drivers and BIOS updates were the usual. Looking at details about the BIOS update, we noticed that the HPBIOSUPDREC.exe that was used was no longer available.  HP released a new version called HPFirmwareUpdRec to replace it. Even if the help stated the command line to be the same, it turned out it didn’t work at all. Unfortunately, it doesn’t seem HP documented the new tool and how to use it. we were able to figure it out by digging into HP forums…

In this post, we will show hot to update HP BIOS using the latest HPFirmwareUpdRec tool within a task sequence.

Prerequisites

When downloading the bits from HP, looking at the BIOS files you need to see HPFirmwareUpdRec.exe.

If the file is not there, the update should be done using the old tool HPBIOSUPDREC.exe like before.

SCCM BIOS update HPFirmwareUpdRec

Update HP Bios with HPFirmwareUpdRec

  • Looking at the help from the old and new tool points to the exact same command line or almost…

SCCM BIOS update HPFirmwareUpdRecSCCM BIOS update HPFirmwareUpdRec

  • If we look closely, the -F as changed from specifying the ROM Bin file, to specify the folder containing the firmware update files.
  • After multiple testing, turns out that we can just skip the -F option and the tool will find the .BIN file within the source folder and use it.
    • The command line should be : HpFirmwareUpdRec64.exe -s -pPWD.bin -r -b
    • The -b option turned out to be necessary even if BitLocker was not enabled yet as part of the task sequence.
    • So the Run Command Line set should look like this.
    • the package used is pointing to the root of the folder where the tool and the .BIN file are located.
    • Note that the previous password.bin file worked just fine.

SCCM BIOS update HPFirmwareUpdRec

  • But that was not the end to surprises. On the new models, HP provides by default an HP_TOOLS partition of 2GB. Turns out that the HPFirmwareUpgRec is using that partition to update the BIOS.
    • without this partition, the BIOS will NOT update at all
    • Add to your partitioning task the following partition
    • No need to assign a letter for that drive, but the name is important.

SCCM BIOS update HPFirmwareUpdRec

  • Once this was added the update went well! Hurray!!
  • Retrying the task sequence over the same computer brought up another error for the BIOS upgrade. Return Code was 282.
    • Manually running the command line from within windows led me to better understand the error.
    • Under the run path of HPFirmwareUpgRec, it will automatically create a log file with the same name.
    • This log provided the details about the error code 282, which simply state  Same Firmware version no need to update!

SCCM BIOS update HPFirmwareUpdRec

[alert type=”info” close=”false” heading=”Note”] This is the log file I used to figure out the previous steps.

Error codes I saw were :

3010 for pending restart

282 for Same firmware version

9191 for the unknown file, while trying to specify the .BIN file[/alert]

  • So we would like to consider the 282 error code as a success code. On the Options tab the run command line, simply add 282 to the list of Success codes!

SCCM BIOS update HPFirmwareUpdRec

 

Voilà!

[ratings] [share title=”Share this Post” facebook=”true” twitter=”true” linkedin=”true”  reddit=”true” ]

Jonathan Lefebvre

Contributor of System Center Dudes. Based in Montreal, Canada, Senior Microsoft SCCM consultant, working in the industry for more than 10 years. He developed a strong knowledge of SCCM and MDT to build automated OS deployment solution for clients, managed large and complexe environment, including Point of Sale (POS) related projects.

Sours: https://systemcenterdudes.com/how-to-update-hp-bios-using-latest-hpfirmwareupdrec-with-sccm/
How to Update the BIOS in Your HP Pavilion

HP BIOS/Firmware/Driver Updates for Student Laptops

Directions on how to update your HP computer's BIOS, Firmware, and Drivers.

We have provided a utility to apply BIOS, firmware, and driver updates for HP computers.

**Due to the nature of this tool, it pulls the newest updates directly from HP and may take some time to download. Please to not interrupt this process once started. It is important to note that if a BIOS update is being applied, you must NOT remove power from your computer, close the lid, or shut it down.This may cause permanent damage to the machine.

  1. To begin this process open HP Updates from your Start Menu. If this is not in your start menu, please open Company Portal and download it from there.

    HP Updates in Start Menu

  2. Upon opening HP Updates from the start menu, the Critical Updates window will open. This window shows if your machine is ready to install the updates. If it shows you have a pending reboot, typically due to a software install or windows updates, please restart your computer and repeat Step 1 above. If your computer is not plugged in, please plug it in, close the window before you repeat Step 1.

    Critical Updates Readiness Window

  3. If the readiness check passes, you will be given the following message, HP Critical UpdatesPlease read this message completely. It is important that you do not interrupt the process once it has begun as doing so has the potential to cause permanent damage to your machine. Please be aware that the following process has to check your machine, download, and install updates and may take some time. Factors include the age of your machine, the last time it ran this utility, as well as the speed of your internet connection. Click the green check box at the bottom of the window to continue.

    https://kb.uwstout.edu/images/group230/shared/HPUpdates/3.PNG

  4. After the Critical Updates window closes, you will be greeted with the HP Image Assistant window. 

    Things to Note:

    • The HP Image Assistant window may open behind any other currently open programs. 
    • We highly recommend closing all other applications while running this utility. 
    • The message displayed at the bottom of the window will change as the updates make progress. 
    • Your computer may beep, and/or give you notifications about recently installed hardware. This is completely normal as the updated drivers are installed. 
    • Please ignore any popup windows in the lower right hand corner telling you to restart during this process. 
    • Once the HP Image Assistant window is closed, the standard installations are completed. 

  5. HP Image Assistant Progress Window

  6. Any additional BIOS/Firmware updates will be completed after restarting your computer.  If any of these updates are available for your computer, it may take up to 20 minutes to install it when it has restarted. Please make sure your power cable remains plugged in and that you have time for this update to complete.  Restart your computer to continue. 

    Please Note:  After you restart, you may see a basic screen saying your computer's BIOS is updating, similar to the screen shown below. It may go through several steps and appear to be stuck or have a black screen. Do not interrupt this process, or disconnect power to your machine.

    BIOS Window

  7. Once you are back to the Windows login screen, the process is complete and you are free to continue using your computer.

    Windows Start Screen
Sours: https://kb.uwstout.edu/page.php?id=101457

You will also like:

HP Consumer Notebook PCs - Updating the BIOS (Basic Input Output System) (Windows)

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

Download and install updates to the computer Basic Input Output System (BIOS). This process is also known as 'flashing the BIOS'. Updating the BIOS is recommended as standard maintenance of the computer. It can also help to improve computer performance, provide support for hardware components or Windows upgrades, or install specific BIOS updates.

CAUTION:

Only install BIOS updates from HP. Installing the BIOS incorrectly can prevent the computer from starting or being recovered. If your computer is managed by an IT service, contact them for the correct update process.

For business computers such as ProBook, EliteBook, and ZBook models, your company IT department or local IT service might manage BIOS settings. Confirm that the updated BIOS version is compatible with your company's deployment environment.

Updating the BIOS automatically using Device Manager in Windows

To automatically update the system firmware (BIOS) to version F.03 (or later) using Device Manager, follow the steps in this section.

  1. Search for and open Device Manager.

    Device Manager menu item
  2. Expand Firmware.

  3. Double-click System Firmware.

    List of devices with System Firmware highlighted
  4. Select the Driver tab.

  5. Click Update Driver.

    Driver tab of the System Firmware Properties window
  6. Click Search automatically for updated driver.

    Click Search automatically for updated driver.
  7. Wait for the update to download and then follow the on-screen instructions.

Update the PC with HP Support Assistant

Use HP Support Assistant to find and install updates, including BIOS updates, for your computer with Windows.

  1. In Windows, search for and open HP Support Assistant, or click the app icon in the taskbar.

    If the app is not installed on your computer, download the latest version from the HP Support Assistant website.

  2. On the My devices tab, find your computer, and then click Updates.

  3. Click Check for updates and messages to get the latest updates.

  4. Wait while HP Support Assistant analyzes the system.

  5. After the analysis completes, select the listed updates, download and install the updates, and then follow any on-screen instructions.

  6. If prompted, restart the computer, and then close the tool.

Updating the BIOS manually from within Windows

Install a BIOS update when Windows opens and you have internet access.

Gathering the required information about your computer BIOS

To find the correct BIOS update, get the computer product name and number, motherboard ID, BIOS version, and processor name.

  1. Using the notebook keyboard, press the fn and esc keys to open the HP System Information utility.

  2. Write down the Product name, Product number, Motherboard ID, BIOS version, and Processor name.

    HP System Information window

Preparing your computer for the BIOS update

To prevent possible problems, close any open applications, and temporarily disable antivirus software and BitLocker before updating the BIOS.

  1. Make sure the power cord is connected to the notebook. Keep it connected during the BIOS update process.

  2. Close any open applications.

  3. Temporarily disable your antivirus software. In Windows, search for and open Security and Maintenance settings, and then click Security to access virus protection settings.

  4. Temporarily disable BitLocker drive encryption. In Windows, search for and open Manage Bitlocker. Click Suspend protection, and then click Yes. Be prepared and have the BitLocker recovery key available.

    CAUTION:

    If BitLocker is not disabled, the next time you restart the computer the BitLocker key might not be recognized. If you do not know the BitLocker recovery key, you might lose data or need to reinstall Windows.

    Suspending BitLocker protection

Installing the BIOS update

Download and install a BIOS update from the HP website.

  1. Go to the HP Software and Driver Downloads page.

  2. Navigate to the product page for your computer.

  3. Select BIOS from the list that displays, and then review any available BIOS updates.

    CAUTION:

    Read the Details section to confirm that the BIOS update is more recent then the one installed and that it applies to your computer. Installing the wrong BIOS could cause your computer to stop working.

    • If you do not see a BIOS update listed for your computer, no update is currently available.

    • If there are multiple BIOS updates available, identify the motherboard installed on your computer using the information from the System Information utility.

    • If you find a BIOS update, click Download. If HP Download and Install Assistant displays, select Download only, and then click Next. Click Save to save the BIOS update file on your computer.

  4. Browse to the folder or desktop where you saved the downloaded BIOS update file, and then double-click the file name (example: sp12345) to start the installation.

    The computer might beep, turn off and on the display or cooling fans, or display a blinking power light. This is normal.

    CAUTION:

    Do not turn off or restart the computer until the update process completes.

    Location of saved BIOS update on computer
  5. Click Yes on the User Account Control screen.

    Clicking Yes to allow the update to install
  6. On the InstallShield Wizard window, click Next.

    Clicking Next in the InstallShield Wizard
  7. Select I accept the terms in the license agreement, and then click Next.

    Agreeing to End User License Agreement
  8. On the HP BIOS Update and Recovery window, click Next.

    Note:

    Windows that display during the update process might vary depending on your computer.

    Clicking Next on HP BIOS Update and Recovery window
  9. Select Update, and then click Next to prepare the update.

    Selecting Update in HP BIOS Update and Recovery
  10. Click Restart Now to install the update.

    Clicking Restart Now to install the update
  11. On the HP BIOS Update screen, click Apply Update Now, or wait for the update to start automatically.

    Clicking Apply Update Now
  12. Wait while the BIOS update installs. The computer displays the installation progress.

    Screen displaying progress of the BIOS update installation
  13. When prompted, click Continue Startup, or wait for the computer to restart automatically. It might take a few minutes for the computer to restart.

    Clicking Continue Startup
  14. When the lock screen displays, sign in to your computer.

    The lock screen displays after a successful BIOS update.
  15. If Bitlocker was suspended, search Windows for , and then click Resume Protection.

  16. Re-enable your antivirus software.

Updating the BIOS manually from a USB flash drive (outside of Windows)

If Windows does not open, use a second working computer with Internet access to download the BIOS update. Copy the update file to a USB flash drive and install it on the original computer.

CAUTION:

If BitLocker protection is enabled on your computer, the BitLocker recovery key is required to start your computer after the BIOS update. Windows might need to be reinstalled if you do not have the key or the key is not recognized after the update.

Getting the computer BIOS information when Windows won't start

To find the correct BIOS update, obtain the original computer’s product name and number, system board ID, processor type, and BIOS version number.

Note:

Your BIOS utility might look different, but the steps are the same.

  1. Turn on the original computer with the issue, and then immediately press the Esc key repeatedly until the Startup Menu opens.

  2. Press the f10 key to open BIOS Setup. The Main tab displays system information.

    Startup menu
  3. Write down the Product Name, Product Number, System Board ID, Processor Type, and BIOS Version number.

  4. Press the f10 key to exit the BIOS, and then turn off the computer.

    BIOS Setup Main tab displays system information.

Set up the BIOS update on a USB flash drive

Use a second computer with internet access to create a BIOS recovery USB flash drive.

  1. Insert a blank USB flash drive into an available port on the second computer.

  2. Go to the HP Software and Driver Downloads page.

  3. Navigate to the product page for your computer.

  4. Select BIOS from the list that displays, and then review any available BIOS updates.

    CAUTION:

    Read the Details section to confirm that it applies to the computer. Installing the wrong BIOS could cause the computer to stop working.

    • If you do not see a BIOS update listed for your computer, no update is currently available.

    • If there are multiple BIOS updates available, identify the motherboard or system board installed on your computer using the information from the System Information utility.

    • If you find a BIOS update, click Download. If HP Download and Install Assistant displays, select Download only, and then click Next. Click Save to save the BIOS update file on your computer.

  5. Browse to the folder or desktop where you saved the downloaded BIOS update file, and then double-click the file name (example: sp12345) to start the installation.

    The computer might beep, turn off and on the display or cooling fans, or display a blinking power light. This is normal.

    CAUTION:

    Do not turn off or restart the computer until the update process completes.

    Opening the BIOS update file
  6. Click Yes on the User Account Control screen.

  7. On the InstallShield Wizard window, click Next.

  8. Select I accept the terms in the license agreement, and then click Next.

    Location of saved BIOS update on computer
  9. If a Location to Save Files window displays, click Next.

  10. In the HP BIOS Update and Recovery window, click Next.

    Note:

    Windows that display during the update process might vary depending on your computer.

    Clicking Next in HP BIOS Update and Recovery
  11. Select Create Recovery USB flash drive, and then click Next.

    Create Recovery USB flash drive in HP System BIOS Update Utility
  12. Select your USB flash drive, and then click Next.

    Selecting the USB flash drive
  13. Wait while the BIOS files copy to the USB flash drive.

    Copying BIOS files to the USB flash drive
  14. When the message displays, click Finish.

    Clicking Finish
  15. If necessary, click Cancel to close the update utility.

    Clicking Cancel to close the update utility
  16. Remove the flash drive from the computer.

Update the BIOS with a USB flash drive

Use the Hardware Diagnostics UEFI on the original computer to update the BIOS.

  1. Turn on the original computer, and then immediately press the esc key repeatedly, about once every second, until the Startup Menu opens.

  2. Press the f2 key to open the Hardware Diagnostics UEFI menu.

  3. Make sure that the power cord is connected to the notebook. Keep it connected during the BIOS update process.

  4. Insert the USB flash drive that contains the BIOS update into an available USB port on the notebook.

  5. Click Firmware Management or BIOS Management.

    Clicking Firmware Management
  6. Click BIOS Update.

    Clicking BIOS Update in the BIOS Management window
  7. Click Select BIOS Image to Apply.

    Select the BIOS Image to apply
  8. Click HP_TOOLS-USB Drive.

    Clicking HP_TOOLS - USB Drive
  9. Click Hewlett-Packard.

    Clicking Hewlett-Packard
  10. Click BIOS.

    Clicking BIOS
  11. Click Current.

    Clicking Current
  12. Select the BIOS update file that matches the System Board or Motherboard ID. The ID has a "0" before the board ID (Example: 02291.bin).

    BIOS update file selection
  13. Click Apply Update Now. Type the administrator password if prompted.

    Clicking Apply Update Now
  14. Wait while the BIOS update installs.

    CAUTION:

    Do not turn off or restart the computer until the update process completes.

    Screen displaying progress of the BIOS update installation
  15. When prompted, click Restart System, or wait for the computer to restart automatically. It might take a few minutes for the computer to restart.

    Note:

    If the update fails, a failure screen displays with additional information. The system might run an automatic BIOS recovery after restarting. Do not attempt to turn off the computer if this happens.

    Clicking Restart System
  16. When the lock screen displays, sign in to your computer.

    The lock screen displays after a successful BIOS update.

Z7_3054ICK0KGTE30AQO5O3KA3016

Z7_3054ICK0KGTE30AQO5O3KA30H4

Z7_3054ICK0KGTE30AQO5O3KA30H5

Flag

Europe, Middle East, Africa

Z7_M0I02JG0KOT530A6KJKFRQ0816

hp-detect-load-my-device-portlet

Actions
Sours: https://support.hp.com/wps/portal/pps/Home/ConcentraWrapper/!ut/p/z0/04_Sj9CPykssy0xPLMnMz0vMAfIjo8zifQ08DYy83A283YODjQ0cnUMsfAPcjQwM3A31C7IdFQFrWXz6/


1184 1185 1186 1187 1188