8 led fixture

8 led fixture DEFAULT

Lithonia Lighting CDS-L96 Series 77 Watt 8 Foot 8' Contractor Select Dimmable LED Strip Light Fixture

ShineRetrofits Input:
The CDS Strip Light Series features the traditional appearance of classic fluorescent strip fixtures and is built with the latest energy efficient and cost saving LEDs. Made with durable, high quality material and designed to last up to 50,000 hours and features 0-10V dimming capabilities.  Save 50% in energy costs by switching to LED with the CDS Strips.

Intended Use:
Inspired by classic fluorescent strip channels, this LED fixture offers a traditional appearance that incorporates the latest technology. Available in several color temperatures, lumen packages and lengths. Ideal for use in commercial, retail, office, warehouse and display applications. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.

Construction:
Compact-design channel and cover are formed from code-gauge, cold-rolled steel. Easy to install row aligner bracket included for continuous row mounting. Finish: High-gloss, baked white enamel (standard).

Optics:
LEDs provide 80+ color rendering index (CRI) at 3500 K, 4000 K and 5000 K. Diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of traditional fluorescent lamps. Lumen output exceeds 1,000 lumens per foot. Luminaire should be installed in applications where ambient temperatures do not exceed maximum ambient operating temperature of 95˚F (35˚C).

Electrical:
This fixture is tested to withstand a maximum line surge of 2.5kV/.2kA ring wave for indoor locations. Also tested to withstand a maximum line surge of 2kV/1kA combination wave for indoor locations. For applications requiring higher level of protection additional surge protection must be provided.

Installation:
Fixture may be surface or suspension mounted with appropriate mounting options (see accessories).
Aligner locks in place for easy continuous row mounting.

Listings:
CSA certified to US and Canadian safety standards and listed suitable for damp locations. Minimum starting temperature at -40°F (-40°C). Maximum ambient operating temperature of 95˚F (35˚C).
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
 
Warranty:
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

Sours: https://www.shineretrofits.com/lithonia-lighting-cds-l96-series-77-watt-8-foot-8-contractor-select-dimmable-led-strip-light-fixture.html

5 Ways to Upgrade 8FT Fluorescent to LED

In the last several years, one of the most popular lighting conversions that has taken place has been the process of converting linear fluorescent to LED. That said, there have been some complications that have made it difficult for end users to make this happen. Today we’re going to look at one specific area that has been difficult for some and that is replacing 8′ linear fluorescents (F96T8, F96T12, etc) with LED.

One of the big factors with replacing 8 foot fluorescents is that there aren’t reliable 8′ LED T8 lamps that are ballast-compatible for a quick switch. Every option involves at least some re-wiring. You may see some 8′ LED T8/T12 lamps that say you can just pop them in and that they’ll be compatible with the existing electronic/magnetic ballast, but they are likely direct from China and aren’t to be trusted.

8-foot-conversion-kit-to-4-foot

Option #1 – Convert 8′ Fluorescent Fixtures to 4′ 2-lamp or 4-lamp

If it is at all possible, we advise converting your 8′ fluorescent T8/T12 fixtures to allow for 4′ LED T8 lamps to be installed. These T8 retrofit kits will convert your 8′ 1-lamp fluorescent fixture to 4′ 2-lamp, and your 8′ 2-lamp fluorescent fixture to 4′ 4-lamp. Once this is done, most choose to go with 4′ Type B LED T8 lamps. This conversion process will work for most but may not for certain fixture types (like sign lighting or a vaportight). Why is it so beneficial to convert to 4′? It is much easier to deal with a 4′ LED T8 in terms of install/shipment and you will have far more choices as far as wattage/lumen packages, color temps, etc.

keystone-single-pin-43w-coated-glass

Option #2 – Replacing F96T8 Single-Pin with Type B 8′ LED T8

This is probably the easiest way to retrofit an 8′ T8 fluorescent but there are still some variables in play. Due to the difficulty of shipping a lamp this size you are likely to have to buy by the case, which can be anywhere from 10 to 25 lamps depending on the manufacturer. The good news is you should have comparable or better light levels while saving 50%+ on energy. You will also be dealing with the same Fa8 single-pin base. Make sure you purchase a Single-Pin 8′ Type B LED T8 from a reliable manufacturer that offers a 50,000 hour lamp with a 5 year warranty and look to see that the lamp has an efficacy of 120 lumens/watt or higher.

To install, you will have to bypass the ballast and wire direct to line voltage. If you want to make this job easier you might consider purchasing a pre-wired socket kit like this Keystone Fa8 Wiring Harness.

keystone-high-output-8-foot-replacement

Option #3 – Replacing F96T8HO/F96T12HO with an R17d Base Type B 8′ LED T8

F96T8HO and F96T12HO 8′ fluorescent lamps are commonly found in signs. If you have retrofitted one of these 8′ fluorescents in a sign to an 8′ LED, you know it is next to impossible to change the sockets. There simply isn’t enough room in the fixture and thus Option #1 with the single-pin lamps will not work. You need an 8′ LED T8 with the same R17d recessed base so you can utilize the existing sockets. You will still need to bypass the ballast and wire direct, but you won’t need to install a new LED driver to power the 8′ LED. Again, look for an R17d Base 8′ LED T8 that has a 50,000 hour life span with a 5 year manufacturer warranty.

ge-type-c-8ft

Option #4 – Replacing F96T8 Single-Pin with Type C 8′ LED T8

This is similar to Option #2, but there are some interesting differences for those who like added controls. As with all Type C methods, the 8′ Type C LED T8 lamps will be powered by an external LED driver. This is an added cost to the system but also reduces the heat load that the lamps take on. The prime reason to go this route over Option #2 would be if you wanted 0-10V dimming. The standard LED driver used to power 2 Type C 8′ LED T8 lamps is a dimming driver that is compatible with most 0-10V dimmers. You will need to purchase the 0-10V dimmer separately so the costs can add up, but you will have a smooth dimming system once finished.

Litetronics Waterproof LED highbay

Option #5 – Replacing F96T8/F96T8HO/F96T12 with new LED Fixtures

Maybe you are looking to completely transform your application and get new LED fixtures installed. While the cost will be highest, this option will yield the best results from superior light levels to added controls. Determining the best LED fixture for your particular situation will be key. Possibly you are replacing 8 foot fluorescents in a highbay application and need an LED Highbay Fixture, or maybe you are looking to replace 8′ fluorescent strip lighting with new LED strip fixtures.

As you can see, there are numerous ways to improve your lighting from 8′ fluorescent to LED. Another thing to keep in mind throughout all of this is that your energy company likely offers rebates for some or all of these options, which may help sway your choice. If you have any questions on all of this, contact Premier Lighting today and we’ll help find the best method for you.

Sours: https://www.premierltg.com/5-ways-upgrade-8ft-fluorescent-led/
  1. Inspiron 560 specifications
  2. New psdrive
  3. Dragon scales vector
  4. Home depot shiplap

8ft LED Ready 2-Lamp T8 Strip Fixture

Whether you're looking to replace existing fixtures or install new lighting, these commercial-grade 8ft LED tube light fixtures are a brilliant, energy-saving alternative to fluorescent lighting.

These fixtures have—and need—no ballast. Unlike fluorescent fixtures, there's no rewiring needed to make them work with LED tubes. These fixtures are compatible any 8ft single-pin T8 or T12 LED bulbs right out of the box. And our customers tell us it's easier to replace their old fixtures with LED-ready ones than it is to retrofit fluorescent fixtures for LED, especially when those fixtures are located in high ceilings and other hard-to-access areas—plus they get new, clean fixtures to go with their new, bright lights.

These commercial-grade 8ft LED tube light fixtures feature die-formed steel and a durable baked enamel finish. The fixtures can be mounted directly to the ceiling or hung suspended. The end plate doubles as a connector for installation in continuous row mounts. Fixtures are UL listed.

Get 5% off your new fixtures When you purchase tubes to go with your new fixture(s), a 5% discount will automatically be applied to the fixtures in your shopping cart. Shop our 8ft LED tube lights here.

Sours: https://www.eledlights.com/8-foot-fixture-for-2x-8ft-led-tubes.html

Pressing against her young warm body, I again began to quickly move my pelvis, while one hand violently massaging the pussy. Now Vicki's tightly compressed buttocks also gave me pleasure, and I could not stand it anymore. And Victoria, having received additional stimulation, finally began to cum. Damn. if you didn't put a dick in the ass of a cumming girl, you probably won't understand me.

Led fixture 8

Nika stood with her back to the door and passionately sucked with my friend, and at that time his hand, lifting up a. Short dress, was already mastering Nika's ass. Vitali's fingers pushed aside a strip of sexy thongs and stroked between the buttocks, sometimes penetrating into the hole itself.

Coughing loudly, I said in a cheerful voice: And I see, you are not wasting time here, have fun to the fullest.

Introducing the Accent B7c 8-Light Kit

Do you like it. Do you like it when I call you whore. Yes, I do.

Similar news:

Wrap yourself in a scarf and think about how tomorrow you will go with a basket to the market to buy yourself food. The train. To the city will arrive closer to midnight, when it is almost asleep. In a small trickle, those, not numerous passengers, who decided to ride it to the end, will quickly dissolve in the city. Bright yellow light and a dull blue sign, shaded by the monument to the leader of the revolution.



237 238 239 240 241