It’s warm and sunny outside. That’s why today I will teach you how to make beautiful summer t-shirts with your Cricut Machine!
I have multiple articles on making and personalizing clothing with your Cricut. Today we are personalizing with iron-on. Nonetheless, you can also visit my making t-shirts with freezer paper stencils and infusible ink t-shirts tutorials for different techniques.
Not only will I teach you how to make summer t-shirts, but I also have 12 Summer Free SVG files for you to get creative and personalize everything summer with your Cricut.
This article is full of tips and since I don’t want you to get lost, this is what I will be covering:
- Cricut Design Space Steps
- Cutting and Weeding
- Transfer steps using an Easypress
- Example of another t-shirt using a regular household iron
- Free Files!
Tip: This tutorial builds upon the skills I teach in every step, so if you’re just getting started with your machine, I suggest you read/follow each step.
Are you ready?
Let’s Daydream Into Reality!
- Cricut – Maker, Explore, Joy
- Fine Point Blade
- Standard Grip Mat (green mat)
- Practice file (download below)
- Easypress/household iron
- Easypress mat/towel
Welcome Summer FREE SVGDownload
The rest of the files are at the end of the step by step tutorial.
- T-Shirt blank*
- Everyday Iron-On (black, pink, green)**
- Parchment paper if using a regular iron-on.
* I used Gildan® t-shirts. I like them because their cotton is already preshrunk, and you can get away without washing before you press vinyl on them.
What I don’t like about them is that their cotton is a little bit stiff. I prefer H&M blanks, and other soft and comfy clothes to wear on a daily basis. So, don’t be afraid to look for blanks on your favorite brands.
**If using specialty vinyl like glitter or foil iron-on, check out the section of this tutorial as layering is more tricky.
Step 1 – Upload to Cricut Design Space
Create a new project in Cricut Design Space, then by clicking on the “Upload” icon, go to “Upload Image.” and upload the “Welcome Summer” practice file (you can download it from the materials list or the end of this tutorial).
Follow the prompts, and select the file from the “Recently uploaded images” and click on “Insert Images.”
Step 2 – Organize File
When you first upload a file to Cricut Design Space, you need to do a little clean-up. As you can see, on the Layers Panel, the file is in multiple layers.
This design has three different colors. Black, pink, and green. Each color represents a different iron-on color we will be using.
This particular file is quite interesting, and I designed it because beyond making a summer t-shirt, I also wanted to teach you some principles when layering iron-on.
First, let’s organize the file by clicking on “Ungroup,” then select all the black pieces from the Layers Panel (pressing shift at all times), and click on “Weld” located at the bottom of the right panel.
Now the file is in three single layers.
When layering iron-on, having an EasyPress is pretty much a must because you need even heat. However, if you don’t have one, I would recommend you organize the file in the following way:
- Ungroup file
- Weld the “Welcome Summer” letters to form one single layer.
- Weld the “seeds” to have them on another single layer.
- Select the pink layer and “welded” seeds and click on “Slice” located next to “Weld”
- Weld letters with watermelon.
You could try using an iron after slicing the seeds and trying to avoid the areas you already pressed. I am working on a tutorial to see how feasible it is to layer iron-on with a household iron.
Since I am using and EP for this t-shirt I will leave it with the black seeds.
Step 3 – Resize & Send to Cut
When making t-shirts, I love using the “Templates” tool because it allows me to resize and visualize where I will place my design in real life.
Here is how you do it!
Click on the “Templates” icon and search for the surface you want to use. For example, I typed in “-T-shirt.” To resize the file, select and drag it by the bottom-right corner until it fits the template. Keep in mind the cutting limits of your machine.
Learn all about using “Templates” in Cricut Design Space.
Important: For Cricut Joy, and if using smart iron-on, each color can’t be larger than 4.5 inches wide and 4 feet long. If using Cricut Mat, the size can’t be larger than 4.25 inches x 6.25 (small mat) or 4.25 inches x 11.75 (large mat).
If you don’t trust the template size because there are many brands and each one of them uses a different sizing system, you can also change the measurement of your design from the top menu.
Once you’re done sizing, click on “Make it” to send your project to your machine.
Step 4 – Turn Mirror On
Every time we use iron-on vinyl, we need to toggle the mirror option to turn it on. Otherwise, your design will look backward after your transfer.
Tip: For newer machines and if using “Smart Materials” Design Space will prompt you to cut without a mat.
For this cut I used my Cricut Maker so I am cutting on a regular mat.
Click on continue to select materials.
Step 5 – Select Materials and Cut
If you have a machine with a smart set dial move it to custom and select material from Design Space. For the machines without a dial (Maker, Joy, Explore 3, etc.) always select your material from Design Space.
Step 6 – Prepare Mat, Cut & Weed
It’s time to prep the Cricut mat and cut!
Place iron-on on mat pretty or shiny side down (Very important). Use a brayer or scraper to get rid of bubbles. I personally love using a brayer, and it’s a must-have tool in my craft room!
Load mat to your Cricut machine and press the flashing go button to start the cut. For Cricut Joy, start the cut from Design Space.
When the cut is complete, weed your design.
Related: Learn how to work with iron-on to perfection!
Step 7 – Remove from Mat & Repeat
Once you weed, bend your mat to release your design from it. Repeat the same process, with the green and pink colors.
Have you tried weeding from the mat?
It’s so much easier!
Step 8 – Transfer Iron-On
It’s time to transfer design to the blank, and since I am using an Easypress and everyday iron-on I preheated to 315° F.
Take a look at the following picture and let’s have a little chat.
When you weed iron-on, you have the carrier sheet or heat-resistant transfer tape. This sheet holds the vinyl in place while cutting the vinyl, and it also withstands the heat when you transfer it.
One of the best practices when layering iron-on is to avoid presses that can mark the vinyl and scorch the materials.
Every design is different, and not all steps will be the same but try to think outside the box and apply the same principles when layering iron-on.
To save a press, trim the “watermelon flesh” so it fits inside the “watermelon skin.”
The pink layer needs to fit perfectly inside the green one. Otherwise the transfer would fail and we don’t want that.
Before you do an initial press, go ahead and preheat your t-shirt for about 5 seconds to get rid of moisture and/or wrinkles.
Important: Have a towel or an EasyPress mat underneath the t-shirt.
Now it’s time to press the watermelon, but you need to find the perfect position. You can grab a ruler, but I like to be practical.
Place the black layer where it’s supposed to go, lift it from the bottom and place the watermelon using the seeds as a reference point.
Once you find the perfect spot remove the black layer and press for about 5-10 seconds on the watermelon. This press has to be really hard to establish an initial bond between the fabric and vinyl.
Lift press and wait a couple of seconds to remove the backing sheet. If it doesn’t come out, repeat hard press for another 5 seconds.
Don’t rush to lift up vinyl while is hot, remember the initial bond is kind of weak so you need to be careful.
Remove the backing sheet from watermelon layers and place the “Welcome Summer” and “Seeds” on the t-shirt.
Important: To protect the initial press, place one of the backing sheets you just lifted and place it on top of the exposed vinyl.
Press the t-shirt with regular settings. If you are using other types of HTV, check out the instructions for that particular brand.
This is what Cricut recommend when using everyday iron-on, considering we already preheated out t-shirt before we did first press.
- Press with light pressure at 315°F for 30 s
- Flip 100% cotton over and press for 15 s
- Slowly remove liner when cool to touch
This design is bigger than the heat plate; therefore, I did one press on the left and one to the right. And for the back, I did 15s on the left and 15s on the right.
For perfect timing and different material combinations, check out Cricut’s heat guide.
Pressing Marks when Layering Iron-On
When pressing iron-on, you can have unwanted marks on other layers. It isn’t very pleasant but also a learning experience. In this case, they are barely noticeable, but I had to zoom in and show you because my job is to teach you.
There’s a couple of ways you can avoid them.
- Make sure the black layer’s carrier sheet is big enough to cover the entire watermelon.
- Trim watermelon seeds to fit the watermelon flesh, making sure the carrier sheet doesn’t touch any green layer. And protect exposed vinyl parchment paper.
I gave this t-shirt to my beautiful AuPair, and you can’t notice the marks at all. However, if you sell your project, you want to make sure you have perfect results all the time.
Transfer using a Household Iron
So here’s another t-shirt, only this time I used a regular household iron to transfer the design! The file is after the step-by-step tutorial. And the steps for cutting and weeding are basically the same as well.
Let’s see how to transfer with a regular iron!
You must have a folded towel and place it underneath your t-shirt, avoiding seams. The towel must be bigger than the design you’re trying to transfer.
The key to a successful transfer with a household iron is using a towel and dividing your design in order, and pressing it from two different angles for 20 to 25 seconds, each avoiding seams at all times.
As you can see, this design is way bigger than my little household iron. So I divided this design into three parts and decided to press diagonally from the top left and then vertically from left to right. Thus, making sure I covered every area.
Because we need to do multiple presses (six in total), you need to protect your t-shirt with parchment paper.
Keep in mind that household irons vary, and some of them are very potent, so I can’t guarantee everything will be perfect.
If you want to get a more accurate measurement of the heat that’s coming out of your iron, I recommend you buy this affordable laser heat thermometer and follow Cricut’s heat guide to find the sweet spot.
The sweet spot for pressing HTV on my garments is the highest heat and one to three notches down (most of the time, two).
These are the presses I did in order:
- Diagonal left top
- Diagonal left middle
- Diagonal left bottom
- Vertical left
- Vertical Middle
- Vertical right
Don’t skip. Always work in order, so you know what areas have received heat and what areas need it. When you’re done pressing, flip the t-shirt and press for 15 seconds using the same dividing principle. (This time, I only did 15 seconds three times)
When you’re done, wait till design is warm to the touch and flip t-shirt.
Isn’t it so cute?
Here’s another one I did!
I love how navy blue looks against grey!
The big questions is?
Which t-shirt is your favorite?
Hard for me to pick!
But, if I had to, I guess it would be the “Beach Please” one!
Free SVG files for Summer T-Shirts or other Summer Crafts
As I promised here are some cool free SVG files to use on your summer t-shirts or why not, other crafts like wood signs, blankets, mugs, etc!
To download the files, you NEED to be on a desktop or laptop, and you must click on the button to trigger a download file on your pc.
Depending on your browser settings, sometimes your PC will ask where to save the file, although, most times, the files will be in your download folder.
If the image opens in a new window (this may happen because of your browser settings), right-click on it, select the option “Save Image As,” and choose where you want to save the file.
SVG files look like a web page file when you download them.
And just so you know, I also have a library full of free SVG files and Printables for all of my subscribers, a.k.a Daydreamers. You can see a preview right here or get access by filling this form.
Sharing is Caring!
Do you know that it takes me over 25 hours of work to complete a single Cricut article? I know, it’s crazy! But I like to make sure that you understand EVERYTHING!
I would appreciate your support on Instagram / Pinterest / YouTube / as I am trying to grow my audience to keep producing great content!
teacher shirt svg
Crafters love working with cut files for their craft designs! The SVG is usually a crafter’s top choice for the file format they want to upload to their cutting machines, like Silhouette or Cricut. And the design and crafting options for these fantastic craft designs are endless!
Popular SVGs Plus Free SVG Designs
SVGs are incredibly popular among crafters, creators, and designers alike. Many of the fantastic cut file designs makers will find combine fantastic imagery with some awesome text. Crafters can find awesome SVG cutting files and designs for so many types of crafts! There are papercraft designs, card making options, paper cutting designs, t-shirt graphics, designs for wood signs, and much more!
Crafters will find designs for almost any subject! All holidays, awareness months, funny designs, themed options, seasons of the year, age groups, and on and on…..truly, there's a design for just about everything! There are single cut files, bundles and, even massive bundles! The sky is the limit!
Imagine all the different ways you can use these SVG images on your Cricut or Silhouette! Make sure you take some time to check out the HUGE SELECTION of free SVGs here on Design Bundles as well! If you want a little inspiration for using all those fantastic cut file designs, then pop on over to our YouTube Channel or head straight for some fun video tutorials like Acrylic Keychains With Cricut or Leatherette Earrings With Silhouette Cameo.
Cutting Files for Crafters
Beyond the numerous ways to use the SVG templates, crafters have different options for what materials to use too! There's adhesive vinyl, heat transfer vinyl (otherwise known as HTV), adhesive vinyl as a stencil, screen printing with adhesive vinyl, sketch pens, engraving pens, and many more. With such a wide variety of fantastic craft designs, materials/formats, you could spend your days just crafting away-just don't forget to eat and sleep!
Other File Formats for Crafters
Designers often provide multiple file formats, even though the term SVG is used to describe most all cut files loosely. Designers usually include other file types like PNG, DXF, and sometimes JPG, PDF, AI, or EPS files. This way, makers can ensure that the fabulous design they want to use has the necessary file formats their particular cutting machine or software needs. So grab your SVG download today and get your craft on!
She explained in a drunken voice that she had had a fight on the phone with her husband. Anya took out another glass and poured brandy. We drank and I went to the kitchen to put the kettle on. Back in the room, we drank some more.
Ideas shirt svg
Monster into my already wet pussy and immediately entered the rhythm of the singer machine, and the other stuffed it into my mouth, I sucked it off big dick and enjoyed it, I always loved sex with big dicks, but these two were big for me, I sucked him with great pleasure, his huge head barely fit in my mouth, so I didn't even try to take it deeper, after a few minutes of such a blowjob, he tells me - bitch take it all in your mouth, I tried it, but he rested on his throat and I almost vomited.
Tears rolled from my eyes and I tried to take it out of my mouth, he seemed to have gone crazy, grabbed my head and began to push the penis into my mouth as much as I could, I began to rest against him, trying to get off him altogether, but he still He grabbed my head tighter and pushed him down my throat to the very balls that spanked my beard, I again tried to do something to get rid of him, but it didn't work, he pushed him into me without thinking if I wanted to I couldn't get rid of him and I just stopped resisting, like a whore I opened my mouth and waited for him to finish, the head of his penis entered my throat and tore it apart, I felt like a cold whore, his penis flew past the tonsils and it seemed to me that he entered the very esophagus, tears flowed from my eyes, and he fucked me in the mouth like in a vagina, just held my head and moved my pelvis.
At the same time, another Caucasian tore my pussy, he flew into my very balls, his head pressed against my uterus every time, hurting me, the pussy was already chomping like a swamp, but he tore me up and, in my opinion, was not going to finish, these two monster tore me in the tail and mane.How To Bring An SVG File From Etsy To Cricut Design Space
Lera became my full-fledged girlfriend and we did not hide it, went to cinemas and other establishments, even once we took tickets for a. Night show and there was no one in the hall, we caressed each other, Lera bent over and gave me a blowjob, I carefully put on a condom and put Leroux on his lap, we sat in this position, almost the entire film, kissed and Lera moaned a little and asked to add pace, at the end of the film we went to her house and did our favorite thing.
Let me remind you that Lera is the sexiest girl in college.
You will also like:
- Emblems advanced warfare
- Ikea watering can
- Emoji shirt target
- These walls lyrics
- Fastest xfinity internet
- Golf carts plano
- Hotel lobby pictures
Her everything was all the same now. Something broke in her that evening. Will you go swimming. she asked.