Phoenix gold amps

Phoenix gold amps DEFAULT




High-Performance Sound for Vehicles with a Limited Footprint

CLEARWATER, FLORIDA, February 19, 2019 — Today, Phoenix Gold, designer and manufacturer of high performance car audio solutions, announced the launch of its MX Series, a sub-compact line of amplifiers, subwoofers, and speakers, engineered for vehicles where space is at a premium, like trucks, jeeps and sports cars. The MX series proves that amazing things can come in small packages.

Phoenix Gold’s MX amplifiers pack in the power while keeping the chassis size small and efficient. The amps are designed for reliability, with robust power supplies that keep the music coming at peak volume in vehicles with limited accommodations. Designed to fit, without compromising power and sound quality, these full-featured Class D amplifiers are available in 3 configurations (monoblock, 4-channel and 5-channel) ranging from 600-800 watts each, to address any system requirements and power needs. Power is achieved with robust unregulated power supplies ensuring you have the ability to have dynamic power on-demand, while still producing the sound quality you expect from Phoenix Gold.

Available now from Authorized Phoenix Gold dealers, the MX Amp lineup includes:

Phoenix Gold’s new slim mount subwoofers are designed to deliver even deeper, more accurate bass in tight environments. Perfect for installations where depth is limited, and a small enclosure is needed. Emphasizing reliability and style, these subwoofers are ideal for nearly any system or budget. These subwoofers are engineered to withstand those with a zealous use of the volume knob and keep the music going.  Each model is crafted with a glass fiber-reinforced cone, high temperature OFC Copper Torriform Voice Coil with our KlaraForm Vented Kapton Former, oversized motor structure, and rugged woven tinsel leads for maximum reliability. Phoeniroll Surround Technology promotes linear motion within the 22mm of peak-to-peak excursion. While performance is great in a small enclosure, if depth is the only hurdle, a larger but shallow box will squeeze even more performance out of these powerful woofers.

Available now from Authorized Phoenix Gold dealers, the MX Slim Subwoofer lineup includes:

  • MX12D4 12” with Dual 4 Ohm Voice Coils
  • MX12D2 12” with Dual 2 Ohm Voice Coils
  • MX10D4 10” with Dual 4 Ohm Voice Coils
  • MX10D2 10” with Dual 2 Ohm Voice Coils

Completing the line is the MX series Dual Concentric Design Coaxial Speakers, available in 6.5”, 5×7” and 6×9”. The MX Speakers provide excellent off axis response as the woofer and tweeter share a common center, thus focusing the sound of both drivers in a uniform field of sound resulting in premium sound quality from stock locations. Silk Dome Tweeters deliver high frequencies smoothly with remarkable clarity and definition. Our unique wave guide technology, Corona Lens, focuses the tweeter, correcting any phase cancellation that occurs in traditional “point source” speakers. The lens provides a smooth blend of the tweeter frequencies with mid woofer by dispersing the sound waves in a balanced fashion.

Available now from Authorized Phoenix Gold dealers, the MX Speaker lineup includes:

MX57CX 5×7” Dual Concentric Coaxial Speaker

MX69CX 6×9” Dual Concentric Coaxial Speaker

MX65CX 6.5” Dual Concentric Coaxial Speaker

For more information regarding the MX Series, contact your Phoenix Gold sales representative. If you are interested in becoming an Authorized Phoenix Gold dealer, visit our contact page to reach AAMP Global.

About AAMP Global:

Established in 1987, owned by Audax Private Equity, and headquartered in Clearwater, Florida, AAMP Global restlessly pursues innovative ways to enhance what moves you.  Global manufacturer of mobile aftermarket technology for consumer and commercial vehicles; developing safety solutions under EchoMaster, smartphone connectivity under iSimple, high performance audio enhancement under Stinger and Phoenix Gold, and OEM integration solutions under Autoleads and PAC.  AAMP enables you to define your drive, one vehicle at a time, anywhere in the world.



X100.2 - Phoenix Gold 2-Channel 250W RMS Xenon Series Amplifier

  • This is a classic model Phoenix Gold amplifier produced in the mid 2000's.  Fans of the brand will remember the Xenon series as PG's answer to JL's "Slash" series.
  • variable thermal feedback controlled fans
  • 24dB Linkwitz-Riley low pass and subsonic filter
  • optimized for any impedance load
  • Tried and true triple Darlington output stage
  • Buffered RCA full range thru output
  • Remote Monitoring Display (RMD) port
  • Low Pass Level control ready (LPL-44)
  • 125 Watts RMS X 2 Actual Tested Power @ 14.35V
  • 250 Watts RMS X 1 Actual Tested Power @ 14.35V
  • 100 Watts RMS x 2 (4-1 ohm stereo) CEA Rating
  • 200 Watts RMS x 1 (8-2 ohm bridged) CEA Rating
  • CEA-2006 approved
  • Dimensions: 14L x 10.6W x 2.5H






All of the Xe.Tune" controls for the crossovers, sensitivity, and bass boost are located on the top of the amplifier.All crossovers are ultra precise Linkwitz- Riley 24dB per octave and a separate high and low pass filter is available for each set of channels. This means that any standalone Xenon amplifier can be set to bandpass by turning both crossovers on. This feature is rarely available on any other amplifier on the market today. All crossover frequency potentiometers have 41 detents or clicks so the end user can set the exact crossover frequency desired. For example, turn the potentiometer 12 clicks for exactly 85Hz. No more turning the potentiometer and guessing where your crossover points are. Full Range Auxiliary Outputs, LPL and RMD Ports come standard on all units.

Power Outputut:
All Xenon amplifiers are rated according to the new CEA-2006 standard which is identical to how we have always rated all Phoenix Gold amplifiers. For example the X100.2 will make a MINIMUM of 200 watts with less than 1% THD @ 14.4 Volts from 1 to 4 ohm. Each Xenon amplifier comes with its own birth certificate that will meet or exceed the printed specifications. Xenon amplifiers are designed to handle extreme abuse and drive almost any load. With Xe.Load " technology its very easy to choose what speakers to wire to the amplifier to get maximum power from the amplifier. It doesn't matter whether its a 1, 2, 3 or 4 ohm load. A Xenon amplifier automatically senses the load from 1 to 4 ohm and drives it with full power every time. This makes life simple for the end customer and guarantees you will always receive full power regardless of the load.

Circuit Topology:
The Xenon series two and four channel models use the legendary Triple Darlington output stage. This is same circuitry found in the classic MS, M, ZPA, ZX, and Titanium amplifiers.This topology is not cheap.This is why you rarely see any car amplifiers and only high end home amplifiers using this circuitry.This provides the ultimate in sound fidelity, headroom, reliability and can drive difficult loads without problems. The Triple Darlington output stage has three levels of amplification that ramp up the energy to the speaker load. The first sub-stage is the pre-drivers, which get their signal from the voltage gain stage and increase the available current in it or "stiffen" the signal. This stiffened signal is then fed to the driver transistors where it is stiffened even more. Finally, the output of the driver transistors is fed into the output transistors where it is stiffened substantially; enough to drive the speaker load wired to the amplifier.


Cooling System:
Phoenix Gold engineers have completely re-engineered the way amplifiers are thermally monitored with unique Xe.Flow" technology. First, they added nearly 5 times the mass of heat sink relative to the very successful TCCH system used in the Titanium amplifiers. They also have bolted the transistors to the major heatsink, with minor extruded heatsink clamp down bars. This allows the transistor to have a heatsink on both sides of the device. Additionally, every model has a variable speed fan located in the center of the amplifier for even more thermal dissipation.The combination of improved mass and the ability to move hot air out of the amplifier make it nearly impossible for them to engage their thermal protection.

PG's competitor's amplifiers use a basic thermal protection that simply shuts the amplifier off when the heatsink reaches 90 degrees C. With the Xe.Flow technology the temperature of the amplifier is con- stantly monitored and its operation is optimized according to the temperature of the amplifier. For example, in the VERY RARE case that a Xenon amplifier begins to reach an unsafe temperature, the amplifier slowly reoptimizes the output of the amplifier. This adjustment in volume is very slight and the end user will most likely never hear it (less than 2dB), this puts the amplifier in an operating range that allows the amplifier to continue to play.The amplifier will monitor its own temperature and adjust its power output, so it will continue to play even on those hot days in the trunk in Texas.

Phoenix Gold has always been know for delivering more than what the customer expects.The Xenon line is no different, they have nearly double the number of output devices relative to the Titanium series. For example, the ultra reliable Ti600.2 was a 600 watt amplifier that used 8 output devices.  Xenon taken that a step further with the X600.1, a 600 watt amplifier, that uses 16 of output devices! This coupled with an excessive amount of bussbars, low ESR capacitors, Xe.Load and Xe.Flow technology make these amplifiers impossible to shut down at almost any load.

Sound Quality:
During the electrical design process, some of the finest parts were chosen to achieve the finest sound quality customers expect from a Phoenix Gold amplifier. Multiple small capacitors are located throughout the PCB layout. By using multiple smaller capacitors in parallel, this lowers the effective ESR of the circuit, (This is the same concept as if you were to parallel multiple subwoofers to achieve a lower impedance.) Since multiple small caps will have a lower ESR this will make them able to deliver energy much quicker than a few large caps. The end result is tighter, more accurate, and dynamic bass. The output stage on the two and four channel models are loaded with audiophile 150 Volt 15 amp Sanken output transistors. Sanken output transistors are used due to their high level of specification and amazing band- width of 60MHz. Each model of the amplifier design is critically listened to and evaluated by Phoenix Gold Engineering and Product staff for hours to ensure the sound quality is as close as possible to their in house master reference audio system.






Exotic sports cars were used for styling inspiration. The aluminum top is a custom tooled stamped, grained, and anodized case, the two intake vents are located on top of the case allow the variable speed cooling fan(s) to push cool air through the heatsink and exhaust out the side endcaps. The end caps are not removable and are made of a proprietary rubber, unlike any other amplifier on the market today. Using the same proprietary rubber, four large rubber grom- mets hide all mounting and terminal connections for the ultimate in stealth installation. The extruded heat sink resides inside the bottom of the amplifier. In the center of the amplifier is a 5mm ultra bright blue LED in a custom tooled headlight bezel which compliments the Xenon trademark.

  1. Synonyms for lewd
  2. Dandelion root amazon
  3. Fallout 76 44

Phoenix Gold Z300.1 300W Monoblock 1 Channel Amplifier

The compact amplifiers of the Z series are equipped with a modern high-end Class-AB chipset and powerful unregulated power supplies. The reliable setting of the optimum frequency is carried out via the high-quality potentiometers. The heavy duty connector block is a testimony to the solid design of the Z-amplifiers and, thanks to the matching hardware, the amplifiers are absolutely convincing in terms of "sound".

The Z-Series amplifiers have been specially designed to integrate them easily and directly into the car to amplify the sound system. Especially the combination of the high-level inputs (optional) with the Auto-Turn-On function allows the original factory sound system to be significantly amplified and equipped with even better speakers. And if you still decide to use a aftermarket radio from well-known brands, the adjustable input voltage will help you to integrate it optimally into the vehicle.

So whether you want to keep the OEM factory radio, install a new aftermarket radio or even change your car, the Z Series amplifiers always provide better performance at an excellent price-performance ratio.

Power specifications

RMS Power Ratings at 14,4V &
1 Ω-
2 Ω1x 300W
4 Ω1x 200W


Front HighPass-
Rear HighPass-
Front LowPass-
Rear LowPass-
Sub LowPass12dB
Sub Phase-
Bass Boost0 bis +18dB @ 45Hz

All features at a glance

  • High-End Class-A/B Chipset

    With the Z300.1, the mono channel is designed in Class-A/B topology - with an efficiency of 55%.

  • Powerful unregulated power supplies

    The unregulated Phoenix Gold power supplies provide the amplifier dynamics reserves and allow stable operation even at 4 & 2 ohms impedances.

  • 12dB Subsonic/Low-pass Crossovers

    All crossovers of the Z-Series amplifiers are equipped with high quality potentiometers and allow a reliable frequency adjustment.

  • Surface Mount Component Technology

    High-quality PCB for professional SMT assembly in which every component is tested computer-controlled before application.

  • “High Level Ready” - Inputs for easy upgrading of all systems (optional)

    The speaker high level inputs can be connected directly to any factory-fitted radio / navigation systems- usually without RCA or line-outs - using the optional High-Low converter (ZRHC). This means that you can also upgrade your OEM factory systems to create power reserves for even better speakers.

  • Intelligent switch-on (High Level Auto Turn On)

    Auto-On is useful if your factory sound system does not provide a remote line to activate the amplifier. If you connect the amplifier directly to the high-level input signal of the system, it can activate the amplifier by means of the input voltage.

  • Pass-Through Low Level RCA outputs

    Use these RCA connectors to connect to a secondary amplifier. This output is a pass-thru connection from the RCA input connectors so that the signal level and frequency response is the same as the original input signal.

  • Intelligent 4-Way Protection Circuit & integrated Cooling Fan

    The intelligent 4-way protection circuitry and the integrated cooling fan work together optimally to ensure better reliability and performance in demanding vehicle environments. The sophisticated protective circuitry protects the amplifier during operation: Thermal / Reversed Power / Polarity / Low Voltage / Short Circuit

  • Heavy Duty Connector Block

    Massive connector block supports for up to 25mm² of power and ground cables provide the amplifiers with the required current without contact resistance. The +12V terminal is connected to the vehicle battery via a fuse - fuse max. 40cm behind the battery! The remote input is controlled by the +12V head unit and GROUND is best connected to a central, well-conducting ground point on the body.

  • Our recommendation for wiring

    Due to the current occurring, the Z amplifiers should be configured as follows:
    - Power: 4 Gauge (25mm²)
    - Fuse: 50A
    - Speaker: 10 Gauge (6mm²)

    For the best possible sound quality, we recommend premium amplifier connection cable sets from the Stinger brand - suitable for this amplifier e. g. the Stinger SK4641 which you will find in our accessories.

  • Connection for optional ZRBC remote control included

    This Z amplifier is equipped with the connection for the option ZRBC remote control for the subwoofer level, which can be easily installed in the car at the desired position. This allows up to 20dB of volume adjustment for the subwoofer channel. It is not a bass boost, it controls the level of the low pass signal.


Phoenix Gold ZQ9004 – 4-Channel High End Amplifier

We are proud to announce the limited-edition release of the Phoenix Gold ZQ9004.

The ZQ9004 is the latest high-end amplifier from Phoenix Golds top master engineers, with over twenty years development experience in high end amplification.

To bring this incredible new amp to life we insisted on using the best possible components from around the world such as transistors from Onsemi, magnetic core transformers from EPCOS, along with capacitors from the likes of ELNA, Rubycon, Wima and Nichicon.

This top of the range audio amplifier has been developed as a highly exclusive and valuable specialist audio electronics product. Phoenix Gold are constantly driving to meet the growing demands of audio enthusiasts around the world to give them the ultimate sound experience.

Often overlooked passive components such as capacitors for example, may not be at the centre of attention but they still form an indispensable part of providing an amplifier that can exceed expectations and wow audio enthusiasts.

This product is the essence of Phoenix Gold’s ground values and includes many of the original features that made us famous from the beginning. Such as our gold-plated circuit boards, not only for show, but because every little detail will affect the sound just like the founding designers knew at Phoenix Gold.

To find out more about Phoenix Gold Europe and our product ranges visit or find us on social media @phoenix_gold_audio_eu

Power 4 Ohm 4 x 150 Watts
Power 2 Ohm 4 x 225 Watts
Power Bridged 4 Ohm 2 x 450 Watts
S/N Ratio 110dB>
Input impedance 22K Ohm
Input Sensitivity 400mV – 5V
T.H.D <0,05%
Protection Therminal
Supply Voltage 11-15V DC Dimensions (LxHxW) 456 x 203 x 58mm 
Two-layer PCB with immersion gold treatment
Original PG technology Dual power supply
24k Gold plated terminals Nichicon (Japan) capacitors
Wima (Germany) capacitors
Toshiba & ON Transistors
German manufactured shielded transformer cores
No filters, no boost, no EQ…nothing in the way
High-end polymer gain potentiometers
S/N Ratio above 110dB
All amps have 2 engraved logos,  one with the serial number

About Phoenix Gold
Phoenix Gold is AAMP Global’s premium audio brand. Entering the mobile audio market in 1990 with their first line of amplifiers, Phoenix Gold is firmly established in the market as one of the leading mobile audio brands in the industry.

With a rich history of design, innovation and a love of everything audio, Phoenix Gold positions itself as a leading global brand. Phoenix Gold continues to make some of the best amplifiers, speakers, and subwoofers in the market today.

read more at >>


Gold amps phoenix

He dangled very beautifully. The blow job helped him to find a bearable shape. I noted to myself that virtually such sex turned out much better for her.

Rockford Fosgate Punch 150HD vs. Phoenix Gold MS-275 - Old School Amp Shootout 1080p

The member stood, a drop glittered at the end. How she wanted to take it in her mouth right now, lick it off. But she was delaying her pleasure. Now her task is to end the spanking.

Similar news:

He, like a noble knight, thinks about the righteous path and does not think about food. He can work in the field and be hungry to atone for his sins. Artemy, with a wild gaze descending from the Etti mountains, looked at the lawyer raging in passions. And screeching began to scratch the bars with metal-ceramic. quietly and efficiently, I decree: A) anal for anal.

2029 2030 2031 2032 2033