Maroon wrap car

Maroon wrap car DEFAULT

Ck Wraps exclusive line of limited edition products are available exclusively on VVIVIDSHOP.COM.  Made to his specifications.

  • Texture: Matte Metallic Finish
  • Thickness: 3.4mils
  • Application: Dry
  • Features: VViViD Natural Air release, Centerpoint Technology, VViViD Heat fuse, VViViD Resist.

  • Adhesive: Acrylic-based, reposition able, slideable

  • Warranty*: N/A
  • Expected durability: 5-7 years.

  • Conformability: Very high
  • Skill level needed: Low

VVIVID+ features a new formula from VViViD Canada that enhances both material and installation.

New material formula adds extra conformability and reliability.  Enhanced adhesive makes installation and removal a breeze!

Add scratch protection and enhanced gloss finish makes this a product you have to try!

If you have any issues / concerns, please do not hesitate to contact our customer service department:

Toll-Free: 1 (844) 588-4843

Sours: https://vvividshop.com/products/2018-ckwraps-matte-bloody-burgundy-metallic

60" Gloss Burgundy

MSRP:

Was:

(You save)

Ships same day from the closest warehouse if ordered before 3:30PM M-F.

Send us your wrap pics
[email protected]

  • U.S. manufactured and developed by Frank Fellers, 3 mil cast, colorchange wrap vinyl with a specially engineered low initial tack, slideable adhesive system including air egress.
  • NOTICE:  All Gloss colors have a special clear protective liner sheet that must be removed prior to or during installation. This protective liner helps to eliminate surface quality issues common with other brands of colorchange vinyls but it does not completely eliminate "adhesive texture" or "orange peel" effects. Watch this video to learn techniques for removing the protective liner.
  • The low initial tack can help reduce adhesive lines and improve installation speed.  It is important to install in 70 degrees F or warmer temperatures. After in place, it is important to use pressure and heat to set the vinyl.  The bond increases steadily for a superior ability to stay down in concave areas. It is also important that the wrapped vehicle is allowed to build a bond for at least 48 hours prior to being exposed to temperatures below 70 degrees.

  • 3 mil cast is slightly thinner than other brands to improve conformability on concave or protruding surfaces and, to improve the appearance when making seams.

  • NOTICE:  CheetahWrap has been designed to help eliminate many of the problems associated with other brands of colorchange wrap vinyls.  Because it is different, it requires some modification of typical installation methods.  We highly recommend to watch this video for information on the recommended installation methods and techniques for CheetahWrap.
  • NOTICE:  Because of the low initial tack, it is important to install in 70 degrees F or warmer temperatures.  Also, it is even more critical to post heat to 180 degrees after squeegee pressure than with other brands.  Failure to post heat after squeegee pressure can result in bubbles appearing after installation. It is also important that the wrapped vehicle is allowed to build a bond for at least 48 hours prior to being exposed to temperatures below 70 degrees. We highly recommend to watch this video for post heating recommendations.
  • NOTICE: During installation "squeegee lines" can appear in the finish but will typically “wet out” after post heat and exposure to direct sunlight for a few days. Using a wrap glove during installation will greatly minimize squeegee lines. 
  • NOTICE: Even though it is rare, all colorchange wrap vinyl can damage paint/chrome or clearcoats. CheetahWrap has a very low initial tac which helps to prevent damage, but it is still possible. It is important to make sure that all base paint/chrome/clearcoats have an acceptable bond to the vehicle surface prior to installing any brand of pressure sensitive vinyl, including CheetahWrap. It is also critical to follow the removal instructions in FAQ #16 to reduce the possibility of damage. In some very rare cases, discoloration or yellowing can occur to base paint or clearcoats upon removal. This can usually be eliminated or reduced by exposing the discolored surface outdoors, in the sun, for several days. CheetahWrap’s Limited Warranty does not provide protection or reimbursement for additional costs including labor or damage to the vehicle, including paint. Please review warranty information.
  • Because CheetahWrap has “slideable” adhesive technology which allows for easier positioning, like other brands this adhesive can “roll” with too much “rubbing”.  Therefore, your installation technique may need to change in order to prevent “sanding” (small bumps under the surface), caused by rubbing the adhesive side over a rounded surface too much.  It can be prevented by making sure to lift the vinyl away from the surface until ready to apply.  It is also important to ensure both the vehicle surface and work area temperatures are above 70 degrees.
  • Even though Cheetahwrap tends to have less “adhesive lines” than other brands during installation, it is still possible.  To prevent adhesive lines, it is important to wrap in a continuous motion as much as possible.  Therefore, the vinyl should not be allowed to “sit” very long in one place prior to its final position.  Most minor adhesive lines can be repaired with heat after installation, or repaired during installation by lifting the vinyl back up, heating and re-installing correctly.
  • The following colors are less than 100% opaque:  Gloss Berry Blue, Gloss Bright Orange, Gloss Bright Yellow, Gloss Passion Purple, Gloss Pearl White and Satin Pearl White
  • Gloss colors should not be stretched more than 10% in order to retain the highest level of gloss.  Discoloration can occur if stretched more than 10%.
  • Satin and Matte colors can sometimes have very slight discoloration patterns which are part of the manufacturing process.  We are unable to guarantee perfect consistency with Satin and Matte colors.
  • All colors can have very slight shade differences from roll to roll, which is common with most colorchange wrap vinyl brands.  We highly recommend using the same roll per installation for optimal color consistency.
  • Satin and Matte colors can “gloss up” with too much heat during installation.  This is usually not repairable.
  • Cleaning and polishing CheetahWrap is recommended only while the vinyl is cool, preferably 70 degrees F or lower.  Only mild solvents or soaps should be used when cleaning.  Like most all other vinyl brands, we do not warranty CheetahWrap if waxes, protectants or other products are applied, however, please refer to those particular manufacturer warranties.  Satin and Matte colors can be more difficult to keep clean than Gloss colors.  Stubborn stains can be removed with Adhesive Remover combined with Magic Eraser pads, however this is not recommended with Gloss colors because permanent scratching can occur.
  • All Metallic, Pearl, and Aluminum colors are directional.  They should be installed in the same direction to prevent shade differences for an optimal appearance.
  • Always pre-test surfaces for adherence prior to installing Cheetahwrap. Certain low energy plastics, paints or gel-coated surfaces may not allow Cheetahwrap to have an acceptable bond. Some customers have used Pledge Revive Brand to improve the bond on these types of surfaces.
  • Do not install CheetahWrap below the static water line on boats and other watercraft.  In addition, on boats/watercraft it is critical to pre-test all surfaces and gel coats prior to installation because CheetahWrap may not have an acceptable bond. Some customers have used Pledge Revive Brand to improve the bond on these types of surfaces.
  • We guarantee zero manufacturer splices in all rolls of CheetahWrap.
  • Always pre-test installation on vehicles.  Do not install if there is any adverse or negative impact on sensors and other safety-related equipment on the intended vehicle.
  • The CheetahWrap warranty is equal to or better than most competitive brands.  Like other brands, our warranty provides no protection or reimbursement for additional costs including labor or vehicle/paint damage.  Please review the warranty information.

  • In order to offer the cheapest possible prices to wrap professionals, all sales are final unless a warranty issue or, if we have made a mistake. Warranty returns must be returned via the prepaid UPS labeled email to you within 7 days of the initiated claim process date.  We require the "Batch" number that can be found on the box label or inside the roll core, email photos, and return of defective materials for all return claims.  All verified claims will receive replacement material or credit on the original card used to purchase the returned product. Order mistakes will be handled promptly on a case by case basis.
  • Even though many customers remove CheetahWrap after three years, ideal removal should be done within two to three years after installation using heat. CheetahWrap should be removed indoors, making sure both the vehicle surface and vinyl surface are approximately 70-80 degrees initially and the car should not be hot to the touch. The vinyl should be pulled back at a 90 degree angle while being warmed evenly. It is critical not to overheat during removal. Overheating can cause the vinyl to remove in smaller pieces and/or cause the vinyl to separate from the adhesive.  Watch this video for information on removing a vehicle wrap.

cw-customer-review-button.png

Sours: https://www.cheetahwrap.com/60-gloss-burgundy/
  1. Nhra seattle 2017
  2. Death note pictures
  3. 320 amp alternator

AUTOMOTIVE CAR WRAPS

Pre-Launch list released!
Check out the new VVIVID+ Line!

MATTE FINISHES

VViViD®'s Matte Finishes are unique in the industry when it comes to it's apearance. This line offers a high sheen finish that is very similar to matte painted surfaces. VViViD®'s matte finishes are easy to clean and maintain, they are not prone to fingerprints, grime stains and blemeshing during cleaning.

VViViD®'s Gloss Finishes are unique in the industry when it comes to it's apearance. This line offers a high gloss finish that is very similar to OEM painted surfaces. VViViD®'s gloss finishes are easy to install, clean and maintain. They all have natural air-release technology.

INFORMATION

Type of product : High Performance PVC 
Durability : Long term
Adhesive : acrylic based solvent
Type of adhesive : Permanent/Removable
Adhesive color : Transparent or Grey Opaque
Finish : Matt 
Liner : XPO Silicone Embossed Liner

Thickness : 3.9 - 4.5 mils

SHOP

SHOP

GLOSS FINISHES

INFORMATION

DOWNLOADS

Type of product : High Performance PVC
Durability : Long term
Adhesive : acrylic based solvent
Type of adhesive : Permanent/Removable
Adhesive color : Transparent or Grey Opaque
Finish : Gloss
Liner : XPO Silicone Embossed Liner

Thickness : 3.9 - 4.5 mils

SHOP

SHOP

CARBON FIBER

VViViD®'s Carbon Fiber vinyl wraps feature a unique variety of colors, finishes and grades. VViViD® is the only manufacturer in the industry that makes a full gloss carbon fiber wrap that isn't printed! Tek Art Gloss Carbons are safe to use for exterior applications, it is completely chemical and water proof.

INFORMATION

DOWNLOADS

Type of product : High Performance PVC
Durability : Long term
Adhesive : acrylic based solvent
Type of adhesive : Permanent/Removable
Adhesive color : Transparent or Grey Opaque
Finish : Gloss/Carbon/Satin
Liner : XPO Silicone Embossed Liner

Thickness : 3.9 - 4.5 mils

SHOP

SHOP

CHROME

FINISHES

VViViD®'s Chrome vinyl wraps come in several flavors: Satin, Holographic and Mirror. Our chrome wraps are different than standard chrome wraps in that they feature SuperCast Conform Technology to be able to easily form to the most complex surfaces. Also, these wraps come pre-laminated to prevent any fading and discoloration with time and exposure to the sun.

INFORMATION

DOWNLOADS

Type of product : High Performance PVC
Durability : Long term
Adhesive : acrylic based solvent
Type of adhesive : Permanent/Removable
Adhesive color : Transparent or Grey Opaque
Finish : Gloss/Satin
Liner : XPO Silicone Embossed Liner

Thickness : 3.9 - 4.5 mils

SHOP

SHOP

BRUSHED FINISHES

VViViD®'s Brushed Metallic vinyl wraps contain tiny metallic flakes to give it an engineered metallic look. Also comes in a chrome finish for more of a reflective finish.

INFORMATION

DOWNLOADS

Type of product : High Performance PVC
Durability : Long term
Adhesive : acrylic based solvent
Type of adhesive : Permanent/Removable
Adhesive color : Transparent or Grey Opaque
Finish : Brushed Metallic
Liner : XPO Silicone Embossed Liner

Thickness : 3.9 - 4.5 mils

SHOP

SHOP

GLOW-IN

THE-DARK

VViViD®'s Glow-In-The-Dark films uses advanced ray capturing technology to charge during the day and glow bright at night.  Night after night, these films can recharge for a nearly endless amount of cycles, glowing as bright the first day wrapped. 

INFORMATION

DOWNLOADS

Type of product : High Performance PVC
Durability : Long term
Adhesive : acrylic based solvent
Type of adhesive : Permanent/Removable
Adhesive color : Transparent or Opaque
Finish : Gloss 
Liner : XPO Silicone Embossed Liner

Thickness : 3.9 - 4.5 mils

SHOP

SHOP

HEADLIGHT AIR-TINT®

VViViD®'s Air-tint® films are the first of their kind and are designed to conform to any difficult surface that would otherwise be impossible with standard headlight tints. All headlight tints come with a subtle natural air release pattern and can be installed using either dry or wet application methods.

INFORMATION

DOWNLOADS

Type of product : High Performance PVC
Durability : Long term
Adhesive : acrylic based solvent
Type of adhesive : Permanent/Removable
Adhesive color : Transparent 
Finish : Gloss or Matte
Liner : XPO Clear Embossed Liner

Thickness : 2.5 mils

SHOP

SHOP

ENAMEL

CALIPER WRAP

VViViD's Enamel Heat Resistant wrap is the fastest way of customizing the color of your caliper and other surfaces that are subject to extreme heat.

This new VViViD adhesive will stick on any metal surface ( painted and bare metal). Simply scrub any loose particles from the surface before wrapping. ( some sanding maybe be required for heavily rusted, crusted or chipping surfaces).

INFORMATION

DOWNLOADS

Features: 400 degree fahrenheit heat resistance. High Cast.
Durability: 2-4 Years
Type of adhesive: Acrylic-based, re-positionable, slide-able
Finish: Gloss
Thickness: 2 mils

SHOP

SHOP

CAMOUFLAGE WRAPS

Stay virtually hidden from your enemies and spies with VViViD®'s Camouflage vinyl wraps. These films are designed with a inconspicuously repeating pattern so every surface wrapped will be unique. 

Sours: https://www.vvividhq.com/automotive-wrap-films

It started to flow, this hot tide in the lower abdomen is hard to miss. And then she gratefully put her ass under the first blow, which made her fall on her stomach, the second followed immediately and in the same place. Darkened in his eyes.

Wrap car maroon

Excited. Now we lick two sweet fingers. I obediently licked it, and now we lick with our tongue only the tips of my. Thumbs. only with the tip of our tongue, hands are not involved.

The first Avery Dennison Passion Red Mercedes S500 in the WORLD

Stain my dress. Petra did not believe that this could happen in reality and with her, but pumped up with drugs and a pathogen, she was ready to do anything just to finish. She opened her mouth wider and inserted herself into Natalie's pussy. Satisfied, Natalie turned on the vibrating balls at full power and began to write in the mouth of the victim.

Similar news:

We met with my boyfriend for 3 years. We lived together, but mostly we walked, wandered around the cinema and cafes, and of course we had sex. In general, for 3 years our relationship has not been able to overcome the candy-bouquet period. Although, to be honest, it was fine with me, I had a boyfriend, love and sex.



2202 2203 2204 2205 2206