Re install vista

Re install vista DEFAULT
Answer
 If the computer manufacturer did not include Vista disk/s, there should be a Recovery Partition on your Hard drive.

That is the way they do it now, most of the time. We are supposed to make the Recovery Disks ourselves, with instructions included in the installed Manufacturer's Software in Start >Programs.

At the bottom of the splash Screen at startup/power on, there usually is a Key number, F10, or F11, to hit to start Recovery Process, to take it back to factory standards (out of the box).

Another way I have seen on some models is to tap F8, and go to a list of Startup options , and start a factory standards recovery from in there, by selecting the Repair computer option.

See if a Manual came with the computer, or go to the Manufacturer's website, email or phone them for info on how to do a Recovery.

Each manufacturer has their own way of doing a Recovery to factory standards.

And save all your Data before you do it, as a reinstall wipes everything from your Hard Drive..

Report abuse

Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation.
Details (required):
250 characters remaining

17 people found this reply helpful

·

Was this reply helpful?

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Answer
You'll need to contact Sony Support and order their Recovery Disks for Windows Vista.

Please see the following:

How to replace missing Microsoft software:
http://support.microsoft.com/default.aspx/kb/326246
Carey Frisch
Windows Expert - Consumer

Report abuse

Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation.
Details (required):
250 characters remaining

1 person found this reply helpful

·

Was this reply helpful?

Sorry this didn't help.

Great! Thanks for your feedback.

How satisfied are you with this reply?

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Thanks for your feedback.

Sours: https://answers.microsoft.com/en-us/windows/forum/all/reinstalling-windows-vista-no-disc/92d304d7-f019-4862-b1e1-5f3c1265eb69

How to Restore Vista to the Factory Defaults Without the Install CD

There are many reasons why a user might be looking to restore their PC to its factory default settings. Maybe they wish to delete everything on their PC for a fresh, clean start. Or, perhaps they want to go back to the original settings after trying some customizations that didn’t work out. Alternatively, it’s possible their Windows PC keeps crashing, has too many bugs, or won’t boot properly. Whatever the reason, without the installation CD, users could give themselves a substantial tech headache trying to restore their Vista PC’s factory settings.

The following methods are the most effective ways to factory reset Windows Vista, no matter who manufactured the PC one has.

Methods to Factory Reset Windows Vista

To factory reset a Vista computer, a little bit of patience is necessary – and the following steps. Some of these methods require running the PC in Safe Mode, but there are options to launch a System Restore through the Start Menu.

Running System Restore from Safe Mode

One of the most accessible options is to go through Safe Mode. The user does not need the Windows Vista installation CD to proceed with this method. Everything can be handled through the easy-to-use Windows interface. However, it’s important to note that System Restore will not be available if the option was previously disabled.

  • Boot up the PC.
  • Before the Windows logo comes onscreen, push F8 and hold it until the Advanced Boot Options menu appears.
  • SelectSafe Mode with Command Prompt” and hit Enter.
  • In the command prompt, enter “rstrui.exe” and hit Enter.
  • If required, type in the administrator password.
  • Follow the guidelines and finish the restore!

Running Startup Repair From Safe Mode

Another option using Safe Mode is Startup Repair. Although this option doesn’t technically restore the PC to its default settings, it can solve many other issues commonly requiring a factory reset. To run Startup Repair:

  • Boot up the PC
  • Before the Windows logo comes onscreen, push F8 and hold it until the Advanced Boot Options menu appears (this is the same as accessing System Restore).
  • ChooseRepair Your Computer” from the options and press Enter.
  • If required, enter the administrator password.
  • When the System Recovery Options menu pops up, choose “Startup Repair,” which should be the first option.
  • Follow the prompts and finish the restore!

Using Easy Recovery Essentials

A third option is to use “Easy Recovery Essentials.” This route allows a user to restore the PC based on a previously stored setting. This method requires downloading the program from a third-party, but it gets the job done in four simple steps:

  • DownloadEasy Recovery Essentials.”
  • Run the program.
  • At the opening menu, choose Windows Vista and select the “System Restore” option.
  • Select the desired snapshot from which to restore the PC.

Running System Restore From Windows Vista

If the user had “System Restore” enabled previously, they can also run it from the Backup and Restore Center. This method accomplishes the same goal as running System Restore through Safe Mode but is only available if the user had System Restore activated in Vista.

  • Start up the PC.
  • From the Start menu, type “Restore” in the Search Bar.
  • Click “Backup and Restore” from the Programs list.
  • Choose the desired restore date and press Enter.
  • Restart the PC.

Reinstalling Windows Vista

Although this is a slightly more involved option, the user could also reinstall Windows Vista. The problem is that the user needs a copy of the installation CD to use this method. The bonus is that reinstalling Windows Vista will restore the PC to its factory default settings. If the user retained (and can locate) the program's activation code, reinstalling this edition of Windows becomes much simpler.

Backing Up and Restoring a PC Without Installation Software

In many cases, a user will want to restore their PC without losing all the data. The following steps benefit users by establishing a backup (or multiple backups) and rebuilding from that data source.

  • From the Start Menu, choose “Control Panel” then “System and Maintenance” then “Backup and.

  • If it’s the user’s first time using Windows Backup, they will need to select “Set Up Backup” and follow the prompts.

  • If the user has an already established backup, they can choose “Back Up. ”* In the Backup and Restore menu, select “Create a System Image” and follow the prompts. This action creates a snapshot of the computer’s state at that moment and allows the user to restore it to this point in the future.
  • Once the user has a snapshot, they can use this as a restore point. System Restore also makes these snapshots if they’ve activated that option before.

Creating and Using Restore Point

So, the key here is to create a restore point. The following steps enable this feature:

  • From the Start Menu, choose “Control Panel” then “System and Maintenance” then. “”
  • Choose “System Protection” from the menu then click. “”
  • Designate the restore point.
  • Go back to the “System and Maintenance” menu and choose “Backup and. ”
  • Select “Restore My Files” from the options. Users can also choose to restore the files of all users on the PC.
  • If a user needs to access the content of the backup, they can choose “Browse for Files” or use the search option.

What If the Backup Is on Another Computer?

A user can still restore their files even with the backup remotely located on another computer. Follow the same procedure as above but instead of choosing “Restore my files,” click the option “select another backup to restore files from.”

Once the user chooses the desired source for the backup, the prompts guide users through restoring the PC to a previous state.

Manufacturer-Specific Methods

One thing to note is that many manufacturers have stopped including recovery disks. However, they do provide options for recovery with manufacturer-specific tools. For example, users can launch a system recovery on an Acer through their program Acer eRecovery or start Packard Bell Recovery Management if working on a Packard Bell.

Depending on the PC’s manufacturer, users might be able to restore it through one of the manufacturer’s tools. There are also ways to access manufacturer-specific restore options by hitting the following shortcuts during the boot screen:

HP: F10/F11 (depends on model).

Packard Bell: F9/F11 (depends on model).

Dell Studio Vista Users

There is also another option for Dell Studio Vista users. The process involves using the Dell Factory Image Restore option. Why use this method? For starters, it’s fast! Plus, it requires fewer steps.

To use this option, do the following:

  • Reboot the PC.
  • Hit F8 on the loading screen to pull up the “Advanced Boot Options” menu.
  • Select “Repair Your Computer” and hitEnter.
  • If required, enter the administrator password and language setting.
  • Select“Dell Factory Image Restore” and hitNext.
  • Choose “Yes” to restore the PC to the default factory settings.
  • Restart the PC.

What If I Forget My Password?

One problem that might come up is if a user has forgotten the password. Since System Restore and other methods through Safe Mode require the administrator password, users will need that. However, what if they’ve lost or forgotten it and still want to restore their PC? There are a few ways to get around this problem so that users can always regain their PC’s factory default settings.

  • In the Systems menu,selectComputer."
  • SelectLocal Users and Groups."
  • Select the correct account and click “Set.”
  • When booting the computer, press F8.
  • When the menu appears, select“Safe Mode with Command.”
  • HitWindows + R” and type “cmd.”
  • Selec*t* the _“Reset Password”_ option from the menu.

No matter which method a user chooses, or even if the password has been forgotten, there will be no problems restoring a PC to its factory settings without the Windows CD/DVD, and getting the PC back into shape – without too much stress or complex coding.

References

Tips

  • Check your user's manual or contact your computer's manufacturer for details on which button is needed on boot to access the boot menu.

Warnings

  • If your computer didn't come equipped with a recovery partition, your only option is to procure a reinstallation CD or create a recovery disc from a working computer.

Writer Bio

Nicky is a business writer with nearly two decades of hands-on and publishing experience. She's been published in several business publications, including The Employment Times, Web Hosting Sun and WOW! Women on Writing. She also studied business in college.

Sours: https://smallbusiness.chron.com/restore-vista-factory-defaults-install-cd-57367.html
  1. Greenville divorce attorney
  2. Future trunks dokkan
  3. Stella marina asbury

How to Clean Install Windows (Delete & Reinstall)

A clean install of Windows is the right way to go when all other software troubleshooting you've tried has been unsuccessful and you want to install or reinstall a "clean" copy of Windows back on your computer.

Most of the time, a clean install is the thing you try after one of Windows' automatic repair processes hasn't solved your problem. A clean install will return your computer to pretty much the same state it was in the day you first turned it on.

In case it's not clear yet: a clean install should be reserved for the most serious of Windows operating system problems since all the data on your primary hard drive partition (usually the C drive) is erased during the process.

How to Clean Install Windows

A clean install of Windows is accomplished during the Windows setup process by removing the existing Windows installation (assuming there is one) before installing a new operating system or reinstalling the existing one.

In versions of Windows prior to Windows 10, the individual steps involved in completing a clean install can differ greatly based on the operating system you happen to be using:

Important Reminders

Remember, a clean install of Windows will erase everything from the drive that Windows is installed on. When we say everything, we mean everything. You'll need to back up anything you want to save before you begin this process! You can back up your files online or use an offline backup tool.

In addition to backing up the individual files you want to keep, you should also prepare to reinstall your programs. Gather the original installation discs and downloaded program setups to any program you want to put back on your computer. One easy way to document all your installed programs is with the Save to text file option in CCleaner, accessible via Tools > Uninstall.

No program outside of those that come bundled with an original Windows setup will be on your computer after the clean install is complete.

If you only have a restore disc from your computer manufacturer but not an original Windows Setup disc or download, a clean install as described in the linked guides above may not be possible. Your restore disc might instead have a relatively similar process that will restore your entire PC, Windows, and programs, back to the factory default.

Please reference the documentation that came with your computer, or contact your computer manufacturer directly for directions.

Thanks for letting us know!

Sours: https://www.lifewire.com/how-to-clean-install-windows-2624904

Restore To Factory Settings – Guide for Windows XP, Vista, 7, 8, 10

Factory Settings or Factory Defaults usually refers to performing a restore or a reset of your computer to its original configuration as it first was when it was purchased.

A restore to factory settings is also known as a reset to factory settings or as a restore to factory defaults.

Restoring a computer to its factory settings will delete all personal files: music, movies, pictures and any installed software applications or drivers that were not included in the original configuration of that computer.

Contents

Your computer can be restored to its factory settings if any of the following are applicable to you:

  • You have a recovery partition installed on your computer. This partition is usually installed by the PC manufacturer (examples: Dell or HP) and can be used to restore a computer.
  • You have a set of recovery discs for your computer. These discs usually come with your computer purchase and can be used to perform a restore.
  • You have the original Windows installation disc. This is the original disc that has Windows XP, Vista, 7, 8 or 10. You can use this media to reinstall Windows.

If none of the above are applicable to you, you still have these options to restore or repair your computer:

  • Use System Restore. Windows XP-8 systems have the System Restore feature enabled by default which can be used to restore a PC to an earlier time. If System Restore wasn’t enabled, you won’t be able to use to restore the PC.
  • Use Easy Recovery Essentials. Depending on the error your computer is showing, use the Automated Repair feature to automatically fix boot errors or its System Restore feature to restore your computer plus other useful features: access and backup your files, web browser, antivirus scanner etc.

Restore Windows XP to factory settings

If no tools are available from the PC manufacturer, e.g. recovery disc or recovery partition, use the following tools from Windows XP itself to reset a computer to its factory settings:

  • The System Restore software (read instructions if you can boot into the system or instructions if you don’t have a Windows XP CD)
  • The installation CD to perform a Repair Install or a reinstall of the system
  • Easy Recovery Essentials

Restore with installation CD

If System Restore isn’t available for your Windows XP (turned off), use the original installation disc to perform a repair or reinstall Windows XP again.

To perform a Repair Install, follow these steps:

  1. Insert the original disc in the disc tray
  2. Start the computer
  3. Press any key when the computers shows the “Press any key to boot from CD” message
  4. Wait for the Windows XP CD to load
  5. At the Welcome to Setup screen, press to access Repair Install.

    Do not press . You don’t need access to Recovery Console, but the Repair Install.

  6. You must agree to the End-Use License Agreement. Press to agree.
  7. At the next screen, make sure that you have the drive where Windows XP is installed highlighted. This is usually presented as: C:\Windows "Microsoft Windows XP Professional"
  8. Confirm that Setup presents you with these 2 choices: To repair the selected Windows XP installation, press .

    and

    To continue installing a fresh copy of Windows XP without repairing, press ESC.

    If you don’t have the “press R” option, you can’t perform a Repair Install.

  9. Once highlighted, press
  10. Wait for the process to perform Repair Install
  11. Windows XP Setup will begin to install the operating system again
  12. Continue with the steps of the wizard to setup the system again

For more information about System Restore on Windows XP systems, read the Windows System Restore: Windows XP guide.

If you can’t use the installation CD, you can use Easy Recovery Essentials:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Select Windows XP from the list and click System Restore
  5. Choose a restore point
  6. Easy Recovery Essentials will now create a backup of your current system configuration and begin restoring the selected snapshot
  7. Once the process is complete, click Restart
  8. Done! Your Windows XP should now start again.Windows XP Boot Screen

Restore without installation CD

If you don’t have the original Windows XP installation CD, you may be able to use System Restore in Safe Mode if this feature was enabled from the start.

To access Safe Mode, follow these steps:

  1. Turn on the computer
  2. Press and hold the key right after booting
  3. At the Windows Advanced Options screen, choose Safe mode with a Command prompt
  4. Once the option is highlighted, press
  5. Login as Administrator or as any user with administrative rights to your PC
  6. When Command Prompt appears, type this command and hit : %systemroot%\system32\restore\rstrui.exe
  7. Follow the next of instructions to continue with System Restore.

If you can’t boot into Safe Mode, access System Restore from Easy Recovery Essentials:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Select Windows XP from the list and click System Restore
  5. Choose a restore point
  6. Easy Recovery Essentials will now create a backup of your current system configuration and begin restoring the selected snapshot
  7. Once the process is complete, click Restart
  8. Done! Your Windows XP should now start again.Windows XP Boot Screen

Other options for restore

Method #1: Reinstall Windows XP

If Fix #1 (Repair Install) explained above doesn’t fix the computer, you can also reinstall the system to have a hard reset of your system.

Reinstalling Windows XP will delete all personal files. Use Easy Recovery Essentials to backup your files before you proceed.

To do so, follow these steps:

  1. Insert the Windows XP CD in the tray
  2. Turn on the system
  3. Press any key to boot from the CD, when at the “Press any key to boot from CD” screen
  4. Wait for the CD to load the necessary library of files
  5. At the Welcome to Setup screen, press to begin the installation
  6. Agree to the End-Use License Agreement. Press to do so.
  7. Select where to install Windows XP. You can also use the D and C keys to delete and then create a new partition.
  8. Press to install the system on the selected partition (highlighted)
  9. Press to continue
  10. Choose to format the partition
  11. Wait for the process to finish
  12. Remove the CD from the disc tray when Setup mentions that your computer will restart
  13. Wait for the system to boot into the Windows XP
  14. Follow the instructions of the wizard to setup the system again

Method #2: Use Easy Recovery Essentials

Easy Recovery Essentials (or EasyRE) can be used to repair or restore a Windows XP system:

  • Find and fix errors automatically with Automated Repair
  • Recover your PC from infections with the built-in antivirus
  • Restore your PC to a working state
  • Access and backup your most important data (like documents, pictures, music, videos and so on)

Download Easy Recovery Essentials

Restore Windows Vista to factory settings

To restore a Windows Vista to factory settings, you can use:

  • System Restore to restore the computer to an earlier working session
  • An install CD to run System Restore, a Startup Repair or a reinstall to restore the computer
  • Easy Recovery Essentials

If the above aren’t available for you, you can also boot into Safe Mode and attempt to run System Restore and Startup Repair.

To perform a hard reset of the computer, you need the installation disc to reinstall Windows Vista.

Restore with installation CD/DVD

If you still have the original Windows Vista CD/DVD and the CD has the Startup Repair feature installed, you can use it to either repair your computer or reinstall the system.

Fix #1: Run Startup Repair

Startup Repair won’t reset a computer to its original factory settings, but it can attempt to fix various errors.

To run Startup Repair follow these instructions:

  1. Boot the computer
  2. Insert the Windows Vista CD
  3. Press any key at the “Press any key to boot from CD or DVD” screen
  4. At the Install Windows window, select your language, time and currency and keyboard method
  5. Click Next
  6. Click Repair Your Computer
  7. Select the operating system from the list
  8. Click Next
  9. Wait for Startup Repair to search and fix for any issues it finds
  10. At the Restart your computer to complete the repairs screen, click Finish

Fix #2: Use Easy Recovery Essentials

Easy Recovery Essentials can access System Restore snapshots created on a Windows Vista computer. To do so, follow these steps:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Select Windows Vista from the list and click System Restore
  5. Choose a restore point
  6. Easy Recovery Essentials will now create a backup of your current system configuration and begin restoring the selected snapshot
  7. Once the process is complete, click Restart
  8. Done! Your Windows Vista should now start again.Windows Vista Boot Screen

Restore without installation CD/DVD

Fix #1: Run System Restore from Safe Mode

System Restore may also be available via Safe Mode without a need for the original Windows Vista installation CD.

System Restore will not work if it has been turned off!

To access System Restore via Safe Mode, follow these steps:

  1. Start the PC
  2. Press and hold the key before the Windows Vista logo appears on your monitor
  3. At the Advanced Boot Options, select Safe mode with Command Prompt
  4. Press
  5. When Command Prompt is available, type the following command: rstrui.exe
  6. Press
  7. Enter the password for the Administrator and press , if prompted to do so
  8. Follow the wizard instructions to choose a restore point

Fix #2: Run Startup Repair from Safe Mode

Startup Repair might also be installed on your hard disk. Startup Repair won’t reset your computer to its factory settings, but it can attempt to fix various errors.

To access it, follow these instructions:

  1. Boot the computer
  2. Press and hold until your system boots into Windows Advanced Boot Options
  3. Select Repair Cour Computer
  4. Select a keyboard layout
  5. Click Next
  6. Login as an administrative user
  7. Click OK
  8. At the System Recovery Options window, select Startup Repair

Fix #3: Use Easy Recovery Essentials

Easy Recovery Essentials can access the snapshots created by System Restore on a Windows Vista computer. Follow these steps:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Select Windows Vista and click System Restore
  5. Choose a restore point
  6. Easy Recovery Essentials will now create a backup of your current system configuration and begin restoring the selected snapshot
  7. Once the process is complete, click Restart
  8. Done! Your Windows Vista should now start again.Windows Vista Boot Screen

Other options for restore

Method #1: Run System Restore from Windows Vista

Windows Vista systems can be restored to an earlier time if System Restore was enabled and was able to create snapshots correctly.

If you can access System Restore on your Windows Vista system, follow these steps:

  1. Boot your computer
  2. Click Start
  3. Type in the search bar
  4. Select Backup and Restore Center from the search results list
  5. Select either to select a custom date for restore or a recommended date by Windows Vista
  6. Click Next
  7. Click Yes, at the warning message
  8. Wait for process to finish
  9. Your computer may restart
  10. When your computer boots back, click Close when presented with the success message: System Restore completed successfully

For more information about System Restore on Windows Vista systems, read the Windows System Restore: Windows Vista guide.

Method #2: Reinstall Windows Vista

To reinstall Windows Vista and perform a hard reset of your computer, follow these steps:

Reinstalling Windows Vista will delete all personal files. Use Easy Recovery Essentials to backup your files before you proceed.

  1. Insert the install CD
  2. Restart the computer
  3. Press any key to boot from the CD when prompted to do so
  4. At the Install Windows window, select a language, time and keyboard method
  5. Click Next
  6. Click Install Now
  7. Follow the wizard instructions to install Windows Vista on your computer

Method #3: Use Easy Recovery Essentials

Easy Recovery Essentials (or EasyRE) can be used to repair or restore a Windows Vista system:

  • Find and fix errors automatically with Automated Repair
  • Recover your PC from infections with the built-in antivirus
  • Restore your PC to a working state
  • Access and backup your most important data (like documents, pictures, music, videos and so on)

Download Easy Recovery Essentials

Restore Windows 7 to factory settings

Windows 7 systems can be restored to factory settings (or factory defaults) if you have the installation disc available to perform a reinstall or a complete new installation of Windows 7.

If a disc isn’t available, you can use System Restore or Startup Repair to either restore the computer to an earlier working time or to potentially repair errors.

You can also use Easy Recovery Essentials.

Restore with installation CD/DVD

If you have the Windows 7 installation disc available, you can use it to perform a repair of your computer (and attempt to fix potential issues), a restore if System Restore is enabled, or to reinstall Windows 7.

Fix #1: Run Startup Repair or System Restore from the disc

The steps are:

  1. Start the computer
  2. Press and hold the key
  3. At Advanced Boot Options, choose Repair Your Computer
  4. Press
  5. Select a keyboard language and click Next
  6. If prompted, login with an administrative account
  7. At the System Recovery Options, choose System Restore or Startup Repair (if this is available)
  8. Follow the wizard instructions to continue with any of the above

System Restore can restore your computer to an earlier date if it has been enabled and ran correctly, while Startup Repair can attempt to fix any found errors that may prevent you from starting Windows 7

Fix #2: Use Easy Recovery Essentials

Easy Recovery Essentials can access System Restore snapshots:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Select Windows 7 and click System Restore
  5. Choose a restore point
  6. Easy Recovery Essentials will now create a backup of your current system configuration and begin restoring the selected snapshot
  7. Once the process is complete, click Restart
  8. Done! Your Windows 7 should now start again.Windows 7 Boot Screen

Restore without installation CD/DVD

If no install CD or DVD is available, you can boot into Safe Mode and run System Restore.

Fix #1: Run System Restore from Safe Mode

Before you begin, note that you can’t undo a restore if you run it from Safe Mode.

The instructions are:

  1. Turn on the computer
  2. Press and hold the key
  3. At the Advanced Boot Options screen, choose Safe Mode with Command Prompt
  4. Press
  5. Log in as Administrator
  6. When Command Prompt appears, type this command: rstrui.exe
  7. Press
  8. Follow the wizard instructions to continue with System Restore

Or, you can run System Restore via the System Recovery Options menu:

  1. Turn the computer and press the key as above
  2. When you are at the Advanced Boot Options screen, choose Repair Your Computer
  3. Choose a keyboard layout
  4. Click Next
  5. At the System Recovery Options window, choose System Restore
  6. Follow the instructions to start the restore process

Fix #2: Run Startup Repair

Startup Repair can be included on your computer. You can run Startup Repair to perform a scan and fix potential issues.

Startup Repair doesn’t restore a computer to its factory settings, but it can potentially fix errors that prevent you from booting into the system.

The steps to access Startup Repair are:

  1. Start the computer
  2. Press the key before the Windows 7 logo appears
  3. At Advanced Boot Options, choose Repair Your Computer
  4. Press
  5. At the System Recovery Options window, choose Startup Repair
  6. Follow the instructions to start the repair process

Fix #3: Use Easy Recovery Essentials

Easy Recovery Essentials can access the snapshots created by Windows 7 System Restore. Follow these steps to access your computer’s restore snapshots:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Select Windows 7 and click System Restore
  5. Choose a restore point
  6. Easy Recovery Essentials will now create a backup of your current system configuration and begin restoring the selected snapshot
  7. Once the process is complete, click Restart
  8. Done! Your Windows 7 should now start again.Windows 7 Boot Screen

Other options for restore

Method #1: Access System Restore from Windows 7

If you can access and boot into your Windows 7 system, you can use System Restore by following these steps:

  1. Boot the computer
  2. Click Start
  3. Type in the search bar
  4. Select System Restore from the search result lists
  5. Type the password of an administrator, if prompted to do so
  6. Click Next
  7. Select Choose a different restore point
  8. Click Next
  9. Select a restore point from the list
  10. Click Next
  11. Click Finish
  12. Click Yes to confirm the process
  13. The process will now start
  14. Your computer may reboot
  15. Click Close when the System Restore completed successfully message appears

For more information about System Restore on Windows 7 system, read the Windows System Restore: Windows 7 guide.

Method #2: Install Windows 7 again

To perform a hard reset of your computer, you can install Windows 7 again on your computer.

This procedure erases everything on your computer. Backup your files before you continue! Use the Browse/Backup Files feature from Easy Recovery Essentials to backup your files. It works even if you can’t boot into Windows.

The steps to install Windows 7 are:

  1. Insert the CD or DVD in the disc tray
  2. Boot the computer
  3. At the Install Windows screen, select a language, time and keyboard
  4. Click Next
  5. Click Install Now
  6. Accept the license terms by clicking the “I accept the license terms” checkbox
  7. Click Next
  8. Select Custom (advanced) at the “Which type of installation do you want?” question screen
  9. Follow the instructions to install Windows 7

Method #3: Use Easy Recovery Essentials

Easy Recovery Essentials (or EasyRE) can be used to repair or restore a Windows 7 system:

  • Find and fix errors automatically with Automated Repair
  • Recover your PC from infections with the built-in antivirus
  • Restore your PC to a working state
  • Access and backup your most important data (like documents, pictures, music, videos and so on)

Download Easy Recovery Essentials

Restore Windows 8, 8.1 to factory settings

Windows 8 can be restored to factory settings by either performing a “refresh” of your PC (without affecting your files) or by performing a “reset” (this removes personal files).

Other options include a system restore if System Restore wasn’t turned off or using Easy Recovery Essentials.

Refresh Windows 8

Before you perform a “refresh” of your Windows 8, read the following notes:

  • If your current version is 8.1, upgraded from 8.0, the refresh operation will restore Windows 8.0 back. After the restore you need to upgrade to Windows 8.1.
  • Applications installed will be removed and a backup folder will be created for them. Applications that were originally installed with Windows 8 will be reinstalled.

To refresh Windows 8, follow these steps:

  1. Start Windows 8
  2. Go to Settings either by swiping in from the right edge of the screen or by pointing the mouse in the upper-right corner of the screen
  3. Click Change PC Settings
  4. Click Update and recovery
  5. Click Recovery
  6. At the Refresh your PC without affecting your files, click Get started
  7. Follow the instructions on the screen

If you can’t boot into Windows 8 to perform a Refresh, use the Automated Repair feature from Easy Recovery Essentials to fix any potential boot errors on your computer:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Choose Automated Repair and click Continue
  5. Choose your Windows installation drive’s letter (usually C:\) and click Automated Repair
  6. Easy Recovery Essentials will now begin to fix errors automatically
  7. Once the process is complete, click Restart
  8. Done! Your Windows 8 should now start again.Windows 8 Boot Screen

Reset Windows 8

A “reset” of Windows 8 removes all personal files from your computer.

Similar to a refresh of the system, if you upgraded from Windows 8 to Windows 8.1, the reset will restore Windows 8.0. You will need to upgrade to Windows 8.1 afterwards.

The steps are:

  1. Start Windows 8
  2. Go to Settings either by swiping in from the right edge of the screen or by pointing the mouse in the upper-right corner of the screen
  3. Click Change PC Settings
  4. Click Update and recovery
  5. Click Recovery
  6. Under the Remove everything and reinstall Windows section, click Get started
  7. Follow the instructions on the screen

If you can’t boot into Windows 8 to perform the Reset, use the Easy Recovery Essentials and run Automated Repair to fix any potential boot errors:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Choose Automated Repair and click Continue
  5. Choose your Windows installation drive’s letter (usually C:\) and click Automated Repair
  6. Easy Recovery Essentials will now begin to fix errors automatically
  7. Once the process is complete, click Restart
  8. Done! Your Windows 8 should now start again.Windows XP Boot Screen

Restore with System Restore

System Restore can restore your Windows 8 or Windows 8.1 to a working condition. To access any of System Restore’s created snapshots, you must load the utility by any of these methods:

  • Access it from within Windows 8, if you can boot into Windows 8
  • Access it using the original Windows 8 installation DVD or Windows 8.1 installation USB
  • Access the snapshots created by System Restore with Easy Recovery Essentials

Method #1: Access System Restore from within Windows 8/8.1

  1. Open Windows 8
  2. Type in the search bar
  3. Select Create a restore point from the search results list
  4. Click System Restore from the System Protection tab
  5. Click Next
  6. Select any of the restore points available
  7. Click Next
  8. Confirm the action by clicking Yes
  9. Your computer will restart
  10. Continue with the restore process instructions by logging back and going to Desktop. A success message should appear: System Restore completed successfully.

Method #2: Access System Restore at boot using the installation media.

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

To access the snapshots, you need the installation media: original Windows 8 DVD or original Windows 8.1 USB drive. It’s the media you used to install Windows.

The steps are:

  1. Insert the Windows 8/8.1 installation media
  2. Restart the computer
  3. At the Install screen, click Repair your computerInstall Screen on Windows 8
  4. Click Troubleshoot
  5. At the Advanced Options screen, click System Restore
  6. Login as Administrator
  7. Click Next
  8. Make sure that the Choose a different restore point option is selected
  9. Click Next
  10. Select a restore point
  11. Click Next
  12. Click Next again, at the Confirm your restore point screen
  13. Click Yes at the warning message to confirm the procedure
  14. Wait for the process to finish
  15. The PC may restart
  16. Login back and go to Desktop
  17. The success message should now appear: System Restore completed successfully.

Method #3: Access the snapshots with Easy Recovery Essentials

Easy Recovery Essentials can access the snapshots created by System Restore and restore your computer. To do so, follow these steps:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Select Windows 8 and click System Restore
  5. Choose a restore point
  6. Easy Recovery Essentials will now create a backup of your current system configuration and begin restoring the selected snapshot
  7. Once the process is complete, click Restart
  8. Done! Your Windows 8 should now start again.Windows 8 Boot Screen

Restore Windows 10 to factory settings

Windows 10 can be restored to factory settings by either performing a “refresh” of your PC (without affecting your files) or by performing a “reset” (this removes personal files).

Other options include a system restore if System Restore wasn’t turned off or using Easy Recovery Essentials.

Refresh Windows 10

To refresh Windows 10, follow these steps:

  1. Start Windows 10
  2. Open the Start Menu, type Recovery and press Enter
  3. On the Recovery screen, click on the Get started button on the right side under Reset this PC
  4. If prompted to Insert Media, you will need to insert your Windows 10 installation media to continue
  5. Click on Keep my files
  6. If you have any apps that will be removed, then review the list, and click on Next when ready
  7. Click on Reset to begin.

If you can’t boot into Windows 10 to perform a Refresh, use the Automated Repair feature from Easy Recovery Essentials to fix any potential boot errors on your computer:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Choose Automated Repair and click Continue
  5. Choose your Windows installation drive’s letter (usually C:\) and click Automated Repair
  6. Easy Recovery Essentials will now begin to fix errors automatically
  7. Once the process is complete, click Restart
  8. Done! Your Windows 10 should now start again.Windows 8 Boot Screen

Alternatively, you may also try to refresh your PC by booting into the Advanced Startup option, clicking Troubleshoot -> Reset this PC and then following the instructions on the screen.

Reset Windows 10

A “reset” of Windows 10 removes all personal files from your computer.

The steps are:

  1. Start Windows 10
  2. Open the Start Menu, type Recovery and press Enter
  3. On the Recovery screen, click on the Get started button on the right side under Reset this PC
  4. If prompted to Insert Media, you will need to insert your Windows 10 installation media to continue
  5. Click on Remove everything
  6. If your PC has more than one drive (partition) on the Windows 10 disk, then select to remove all files (delete) from only the Windows drive or from all drives. (see screenshots below)
  7. Click on either Just remove my files or Fully clean the drive for how you want to clean your drive.
  8. Click on Reset to begin.

If you can’t boot into Windows 10 to perform the Reset, use the Easy Recovery Essentials and run Automated Repair to fix any potential boot errors:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Choose Automated Repair and click Continue
  5. Choose your Windows installation drive’s letter (usually C:\) and click Automated Repair
  6. Easy Recovery Essentials will now begin to fix errors automatically
  7. Once the process is complete, click Restart
  8. Done! Your Windows 8 should now start again.Windows XP Boot Screen

Alternatively, you may also try to reset your PC by booting into the Advanced Startup option, clicking Troubleshoot -> Reset this PC and then following the instructions on the screen.

Restore with System Restore

System Restore can restore your Windows 10 to a working condition. To access any of System Restore’s created snapshots, you must load the utility by any of these methods:

  • Access it from within Windows 10, if you can boot into Windows 10
  • Access it using the original Windows 10 installation DVD or Windows 10 installation USB
  • Access the snapshots created by System Restore with Easy Recovery Essentials

Method #1: Access System Restore from within Windows 10

  1. Open Windows 10
  2. Open the Control Panel
  3. Type  in the search bar and press Enterwin10_recovery
  4. Click Open System Restore from the Recovery screen
  5. Click Next
  6. Select any of the restore points available
  7. Click Next
  8. Confirm the action by clicking Yes
  9. Your computer will restart
  10. Continue with the restore process instructions by logging back and going to Desktop. A success message should appear: System Restore completed successfully.

Method #2: Access System Restore at boot using the installation media.

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

To access the snapshots, you need the original Windows 10 installation media. It’s the media you used to install Windows.

The steps are:

  1. Insert the Windows 10 installation media
  2. Restart the computer
  3. At the Install screen, click Repair your computerwin10_setup
  4. Click Troubleshoot
  5. At the Advanced Options screen, click System Restore
  6. Choose the Operating System you want to restore
  7. Click Next
  8. Choose the Restore Point you want to use
  9. Click Next
  10. Click Next
  11. Click Yes at the warning message to confirm the procedure
  12. Wait for the process to finish
  13. The PC may restart
  14. Login back and go to Desktop
  15. The success message should now appear: System Restore completed successfully.

Method #3: Access the snapshots with Easy Recovery Essentials

Easy Recovery Essentials can access the snapshots created by System Restore and restore your computer. To do so, follow these steps:

  1. Download Easy Recovery Essentials
  2. Burn the ISO image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
  3. Boot Easy Recovery Essentials
  4. Select Windows 10 and click System Restorew10_restore_drives
  5. Choose a restore pointw10_restore_points
  6. Easy Recovery Essentials will now create a backup of your current system configuration and begin restoring the selected snapshotw10_restore_success
  7. Once the process is complete, click Restart
  8. Done! Your Windows 10 should now start again.Windows 8 Boot Screen

More Information

Support Links

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

  • Windows XP (all editions)
  • Windows Vista (all editions)
  • Windows 7 (all editions)
  • Windows 8 (all editions)
  • Windows 8.1 (all editions)
  • Windows 10 (all editions)
  • Windows Server 2003 (all editions)
  • Windows Server 2008 (all editions)
  • Windows Server 2012 (all editions)

Propose an edit

Sours: https://neosmart.net/wiki/restore-to-factory-settings/

Vista re install

Already jerking off his muscle there. You cant do anything to reverse the situation. Peace be with you all, fuck you.

How to factory reset/restore windows vista

I wriggled in his arms, and he suddenly began to gently stroke my head: Fucked up. my little. fucked a girl. five hefty bulls.

You will also be interested:

From below and from above. They envy, you bastards, what is really there. Nobody shouted for so long. We lay still a little, hugging tightly, but I didnt finish, and smart Tanechka, deftly turning over, gave me her delicious ass.



15086 15087 15088 15089 15090